AutoCodes – Nissan – P2127 2005 Nissan Altima Sedan

P2127 2005 Nissan Altima Sedan Code - Accelerator Pedal Position Sensor Circuit

Quick Answer

The Accelerator Pedal Position (APP) Sensor is installed on the upper end of the accelerator pedal assembly. Common causes include Faulty Accelerator Pedal Position Sensor, Accelerator Pedal Position Sensor harness is open or shorted, Accelerator Pedal Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2127 2005 Nissan Altima Sedan indicates Accelerator Pedal Position Sensor Circuit.
Common causes: Common causes include Faulty Accelerator Pedal Position Sensor, Accelerator Pedal Position Sensor harness is open or shorted, Accelerator Pedal Position Sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 5,287

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 14, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2127 2005 Nissan Altima Sedan Description

The Accelerator Pedal Position (APP) Sensor is installed on the upper end of the accelerator pedal assembly. The sensor detects the accelerator position and sends a signal to the Engine Control Module (ECM). Accelerator pedal position sensor has two sensors. These sensors are a kind of potentiometers which transform the accelerator pedal position into output voltage, and emit the voltage signal to the ECM. In addition, these sensors detect the opening and closing speed of the accelerator pedal and feed the voltage signals to the ECM. The ECM judges the current opening angle of the accelerator pedal from these signals and controls the throttle control motor based on these signals. Idle position of the accelerator pedal is determined by the ECM receiving the signal from the accelerator pedal position sensor. The ECM uses this signal for the engine operation such as fuel cut.

OBDII Code P2127 2005 Nissan Altima Sedan - Accelerator Pedal Position Sensor Circuit - AutoCodes.com — P2127 2005 Nissan Altima Sedan Code - Accelerator Pedal Position Sensor Circuit

What does this mean?

What are the Possible Causes of the DTC P2127 2005 Nissan Altima Sedan?

Faulty Accelerator Pedal Position Sensor
Accelerator Pedal Position Sensor harness is open or shorted
Accelerator Pedal Position Sensor circuit poor electrical connection
Faulty Electric Throttle Control Actuator (TP Sensor 1 and 2)
Faulty Engine Control Module (ECM)

How to Fix the DTC P2127 2005 Nissan Altima Sedan?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2127 2005 Nissan Altima Sedan code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2127 2005 Nissan Altima Sedan code?

Need more information on how to fix the P2127 2005 Nissan Altima Sedan code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2127 2005 Nissan Altima Sedan code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2127 2005 Nissan Altima Sedan Code

1. What are the common symptoms of OBDII code P2127 in a 2005 Nissan Altima Sedan?

- Common symptoms include a lack of response when pressing the accelerator pedal, reduced engine power, and the vehicle going into "limp mode."

2. What can cause the OBDII code P2127 in a 2005 Nissan Altima Sedan?

- The code P2127 is typically triggered by a faulty accelerator pedal position sensor, damaged wiring in the sensor circuit, or a problem with the throttle body.

3. How can I diagnose the issue causing the OBDII code P2127 in my 2005 Nissan Altima Sedan?

- You can diagnose the issue by using a scan tool to read the trouble codes, inspecting the accelerator pedal position sensor and its wiring for any signs of damage, and checking the throttle body for proper operation.

4. Can I continue driving my 2005 Nissan Altima Sedan with the OBDII code P2127 present?

- It is not recommended to continue driving with the code P2127 present, as it can lead to further damage to the vehicle and potentially unsafe driving conditions.

5. How can I repair the OBDII code P2127 in my 2005 Nissan Altima Sedan?

- Depending on the exact cause, the repair may involve replacing the accelerator pedal position sensor, repairing or replacing damaged wiring, or cleaning/replacing the throttle body.

6. Is it possible to reset the OBDII code P2127 in a 2005 Nissan Altima Sedan without fixing the underlying issue?

- While you can clear the trouble code using a scan tool, it is not recommended to do so without addressing the root cause of the problem, as it will likely return.

7. How much does it typically cost to repair the OBDII code P2127 in a 2005 Nissan Altima Sedan?

- The cost of repair can vary depending on the exact cause of the issue, but it may range from $100 to $300 for parts and labor.

8. Can a DIY enthusiast fix the OBDII code P2127 in a 2005 Nissan Altima Sedan?

- Depending on your skill level and access to tools, some DIY enthusiasts may be able to replace the accelerator pedal position sensor or repair wiring themselves. However, it is recommended to consult a professional if unsure.

9. Will fixing the OBDII code P2127 improve the performance and fuel efficiency of my 2005 Nissan Altima Sedan?

- Yes, resolving the issue causing the code P2127 can improve the performance and fuel efficiency of your vehicle by ensuring proper communication between the accelerator pedal and the engine.

10. How long does it usually take to repair the OBDII code P2127 in a 2005 Nissan Altima Sedan?

- The repair time can vary depending on the exact cause of the issue and the expertise of the technician, but it typically takes around 1 to 2 hours to diagnose and fix the problem.