AutoCodes – Toyota – P2126 2013 Toyota RAV4

P2126 2013 Toyota RAV4 Code - Throttle/Pedal Position Sensor/Switch 'E' Circuit Range / Performance

Quick Answer

The Accelerator Pedal Position (APP) sensor is built into the accelerator pedal sensor assembly and has 2 sensor circuits: VPA (main) and VPA2 (sub). Common causes include Faulty Accelerator Pedal Position (APP) Sensor, Accelerator Pedal Position Sensor harness is open or shorted, Accelerator Pedal Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2126 2013 Toyota RAV4 indicates Throttle/Pedal Position Sensor/Switch 'E' Circuit Range / Performance.
Common causes: Common causes include Faulty Accelerator Pedal Position (APP) Sensor, Accelerator Pedal Position Sensor harness is open or shorted, Accelerator Pedal Position Sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 247

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Sep 17, 2022

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2126 2013 Toyota RAV4 Description

The Accelerator Pedal Position (APP) sensor is built into the accelerator pedal sensor assembly and has 2 sensor circuits: VPA (main) and VPA2 (sub). This sensor is a non-contact type sensor and uses Hall-effect elements in order to yield accurate signals even in extreme driving conditions, such as at high speeds as well as very low speeds. The voltage, which is applied to terminals VPA and VPA2 of the Engine Control Module (ECM), varies between 0.5 V and 4.75 V in proportion to the operating angle of the accelerator pedal (throttle valve). A signal from VPA indicates the actual accelerator pedal opening angle (throttle valve opening angle) and is used for engine control. A signal from VPA2 conveys the status of the VPA circuit and is used to check the accelerator pedal position sensor itself.
The ECM monitors the actual accelerator pedal opening angle (throttle valve opening angle) through the signals from VPA and VPA2 and controls the throttle actuator according to these signals.
When either the output voltage of VPA or VPA2 deviates from the standard range, or the difference between the output voltages of the 2 sensor circuits is more than the threshold, the ECM determines that there is a malfunction in the accelerator pedal position sensor. The ECM then illuminates the MIL and stores a Diagnostic Trouble Code (DTC).

OBDII Code P2126 2013 Toyota RAV4 - Throttle/Pedal Position Sensor/Switch 'E' Circuit Range / Performance - AutoCodes.com — P2126 2013 Toyota RAV4 Code - Throttle/Pedal Position Sensor/Switch 'E' Circuit Range / Performance

What does this mean?

What are the Possible Causes of the DTC P2126 2013 Toyota RAV4?

Faulty Accelerator Pedal Position (APP) Sensor
Accelerator Pedal Position Sensor harness is open or shorted
Accelerator Pedal Position Sensor circuit poor electrical connection
Faulty Engine Control Module (ECM)

How to Fix the DTC P2126 2013 Toyota RAV4?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2126 2013 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2126 2013 Toyota RAV4 code?

Need more information on how to fix the P2126 2013 Toyota RAV4 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2126 2013 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2126 2013 Toyota RAV4 Code

1. What are the common symptoms of OBDII code P2126 in a 2013 Toyota RAV4?

The common symptoms of OBDII code P2126 in a 2013 Toyota RAV4 include reduced engine power, hesitation during acceleration, and illuminated Check Engine Light.

2. What does the OBDII code P2126 for a 2013 Toyota RAV4 indicate?

OBDII code P2126 for a 2013 Toyota RAV4 indicates an issue with the Throttle/Pedal Position Sensor/Switch 'E' Circuit Range/Performance.

3. What are the possible causes of OBDII code P2126 in a 2013 Toyota RAV4?

Possible causes of OBDII code P2126 in a 2013 Toyota RAV4 include a faulty throttle position sensor, damaged wiring or connectors, or issues with the throttle body.

4. How can I diagnose the OBDII code P2126 in my 2013 Toyota RAV4?

To diagnose OBDII code P2126 in a 2013 Toyota RAV4, you can use a scan tool to check for the code, inspect the throttle position sensor and related wiring, and perform a throttle body inspection.

5. Can I drive my 2013 Toyota RAV4 with OBDII code P2126?

It is not recommended to drive your 2013 Toyota RAV4 with OBDII code P2126, as it can lead to performance issues and potentially unsafe driving conditions.

6. How do I repair OBDII code P2126 in my 2013 Toyota RAV4?

To repair OBDII code P2126 in a 2013 Toyota RAV4, you may need to replace the throttle position sensor, repair damaged wiring or connectors, or clean/replace the throttle body.

7. Will resetting the OBDII code P2126 in my 2013 Toyota RAV4 make it go away?

Resetting the OBDII code P2126 in a 2013 Toyota RAV4 may temporarily turn off the Check Engine Light, but if the underlying issue is not fixed, the code is likely to reappear.

8. How much does it cost to fix OBDII code P2126 in a 2013 Toyota RAV4?

The cost to fix OBDII code P2126 in a 2013 Toyota RAV4 can vary depending on the specific repairs needed, such as sensor replacement or wiring repair. It is recommended to consult a mechanic for an accurate estimate.

9. Can a DIY enthusiast repair OBDII code P2126 in a 2013 Toyota RAV4?

A DIY enthusiast with the necessary tools and knowledge may be able to repair OBDII code P2126 in a 2013 Toyota RAV4, especially for simpler tasks like sensor replacement. However, complex issues may require professional help.

10. How often does OBDII code P2126 occur in a 2013 Toyota RAV4?

OBDII code P2126 can occur in a 2013 Toyota RAV4 due to various factors, including age, mileage, and driving conditions. Regular maintenance and prompt attention to warning signs can help prevent this issue.