AutoCodes – Ford – P2126 2011 Ford Fusion

P2126 2011 Ford Fusion Code - Throttle/Pedal Position Sensor/Switch 'E' Circuit Range/Performance

Quick Answer

The Accelerator Pedal Position (APP) sensor is an input to the Powertrain Control Module (PCM) and used to determine the amount of torque requested by the operator. Common causes include Faulty Accelerator Pedal Position (APP) Sensor, Accelerator Pedal Position (APP) Sensor harness is open or shorted, Accelerator Pedal Position (APP) Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2126 2011 Ford Fusion indicates Throttle/Pedal Position Sensor/Switch 'E' Circuit Range/Performance.
Common causes: Common causes include Faulty Accelerator Pedal Position (APP) Sensor, Accelerator Pedal Position (APP) Sensor harness is open or shorted, Accelerator Pedal Position (APP) Sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 1,896

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 14, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2126 2011 Ford Fusion Description

The Accelerator Pedal Position (APP) sensor is an input to the Powertrain Control Module (PCM) and used to determine the amount of torque requested by the operator. There are 2 pedal position signals in the sensor. Both signals, APP and APP2, have a positive slope (increasing angle, increasing voltage), but are offset and increase at different rates. The 2 pedal position signals make sure the PCM receives a correct input even if 1 signal has a concern. The PCM determines if a signal is incorrect by calculating where it should be, inferred from the other signals. If a concern is present with one of the circuits the other input is used. There are 2 reference voltage circuits, 2 signal return circuits, and 2 signal circuits (a total of 6 circuits and pins) between the PCM and the APP sensor assembly. The pedal position signal is converted to pedal travel degrees (rotary angle) by the PCM. The software converts these degrees to counts, which is the input to the torque based strategy. The accelerator pedal position (APP) sensor fault flag is set for sensor 2 by the PCM, indicating the signal is out of the normal self-test operating range

OBDII Code P2126 2011 Ford Fusion - Throttle/Pedal Position Sensor/Switch 'E' Circuit Range/Performance - AutoCodes.com — P2126 2011 Ford Fusion Code - Throttle/Pedal Position Sensor/Switch 'E' Circuit Range/Performance

What does this mean?

What are the Possible Causes of the DTC P2126 2011 Ford Fusion?

Faulty Accelerator Pedal Position (APP) Sensor
Accelerator Pedal Position (APP) Sensor harness is open or shorted
Accelerator Pedal Position (APP) Sensor circuit poor electrical connection
Faulty Powertrain Control Module (PCM)

How to Fix the DTC P2126 2011 Ford Fusion?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2126 2011 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2126 2011 Ford Fusion code?

Need more information on how to fix the P2126 2011 Ford Fusion code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2126 2011 Ford Fusion code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2126 2011 Ford Fusion Code

1. What are the common symptoms of the OBDII code P2126 in a 2011 Ford Fusion?

The common symptoms of P2126 may include reduced engine power, hesitation or stalling during acceleration, and the illumination of the Check Engine Light.

2. What causes the OBDII code P2126 in a 2011 Ford Fusion?

The P2126 code in a 2011 Ford Fusion is typically caused by a fault in the throttle/pedal position sensor/switch 'E' circuit, which may be due to sensor malfunctions, wiring issues, or a faulty throttle body.

3. How can I diagnose the OBDII code P2126 in my 2011 Ford Fusion?

To diagnose P2126, you can use an OBDII scanner to retrieve the trouble codes and then inspect the throttle/pedal position sensor, check the sensor wiring for damage, and test the throttle body for proper function.

4. Can I drive my 2011 Ford Fusion with the OBDII code P2126?

It is not recommended to drive your Ford Fusion with the P2126 code present, as it can lead to potential performance issues and further damage to the engine or other components.

5. How do I repair the OBDII code P2126 in my 2011 Ford Fusion?

To repair P2126, you may need to replace the throttle/pedal position sensor, repair any damaged wiring, or clean/replace the throttle body. It is advisable to consult a professional mechanic for proper diagnosis and repair.

6. Is the OBDII code P2126 a common issue in the 2011 Ford Fusion?

While the P2126 code may not be extremely common in the 2011 Ford Fusion, it can still occur due to sensor or circuitry issues, requiring attention to ensure proper vehicle operation.

7. Can a DIY enthusiast fix the OBDII code P2126 in a 2011 Ford Fusion?

Depending on your mechanical skills and access to tools, you may be able to address the P2126 code DIY by following repair guides or online tutorials. However, seeking professional help is advisable for accurate diagnosis and repair.

8. How much does it cost to repair the OBDII code P2126 in a 2011 Ford Fusion?

The cost of repairing P2126 in a 2011 Ford Fusion can vary depending on the extent of the issue, parts needed, and labor costs. It is recommended to obtain quotes from different mechanics or repair shops for an accurate estimate.

9. Will resetting the OBDII code P2126 in my 2011 Ford Fusion make it go away?

Resetting the P2126 code may temporarily turn off the Check Engine Light, but it will not fix the underlying issue causing the fault. It is crucial to diagnose and repair the problem to prevent further complications.

10. How often should I check the throttle/pedal position sensor in my 2011 Ford Fusion to prevent the OBDII code P2126?

Regular maintenance checks, including inspecting the throttle/pedal position sensor and its wiring, can help prevent issues like P2126 in your 2011 Ford Fusion. It is recommended to follow the manufacturer's maintenance schedule for optimal vehicle performance.