P2123 2013 Nissan Rogue Code - Accelerator Pedal Position Sensor Circuit Range/Performance
Quick Answer
The Accelerator Pedal Position (APP) sensor is installed on the upper end of the accelerator pedal assembly. Common causes include Faulty Accelerator Pedal Position Sensor, Accelerator Pedal Position Sensor harness is open or shorted, Accelerator Pedal Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2123 2013 Nissan Rogue indicates Accelerator Pedal Position Sensor Circuit Range/Performance.
- Common causes
- Common causes include Faulty Accelerator Pedal Position Sensor, Accelerator Pedal Position Sensor harness is open or shorted, Accelerator Pedal Position Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2123 2013 Nissan Rogue Description
Accelerator pedal position sensor has two sensors. These sensors are a kind of potentiometers which transform the accelerator pedal position into output voltage, and emit the voltage signal to the ECM.
In addition, these sensors detect the opening and closing speed of the accelerator pedal and feed the voltage signals to the ECM. The ECM judges the current opening angle of the accelerator pedal from these signals and controls the throttle control motor based on these signals.
Idle position of the accelerator pedal is determined by the ECM receiving the signal from the accelerator pedal position sensor. The ECM uses this signal for the engine operation
such as fuel cut.
What are the Possible Causes of the DTC P2123 2013 Nissan Rogue?
- Faulty Accelerator Pedal Position Sensor
- Accelerator Pedal Position Sensor harness is open or shorted
- Accelerator Pedal Position Sensor circuit poor electrical connection
How to Fix the DTC P2123 2013 Nissan Rogue?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2123 2013 Nissan Rogue code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2123 2013 Nissan Rogue code?
Need more information on how to fix the P2123 2013 Nissan Rogue code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2123 2013 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2123 2013 Nissan Rogue Code
1. What are the common symptoms of OBDII code P2123 in a 2013 Nissan Rogue?
- Common symptoms include issues with acceleration, reduced engine power, hesitation, and in some cases, the vehicle may go into a limp mode.
2. What does the OBDII code P2123 mean for a 2013 Nissan Rogue?
- OBDII code P2123 indicates a problem with the accelerator pedal position sensor circuit, specifically related to range/performance issues.
3. What are the possible causes of OBDII code P2123 in a 2013 Nissan Rogue?
- The code P2123 in a 2013 Nissan Rogue can be caused by a faulty accelerator pedal position sensor, wiring issues, or problems with the electronic throttle control system.
4. How can I diagnose the issue causing OBDII code P2123 in my 2013 Nissan Rogue?
- Diagnosis typically involves checking the accelerator pedal position sensor for proper voltage and resistance, inspecting the wiring harness for damage, and testing the electronic throttle control system.
5. Can I continue driving my 2013 Nissan Rogue with OBDII code P2123?
- It is not recommended to continue driving your vehicle with code P2123, as it can lead to further damage and safety concerns. It's best to address the issue promptly.
6. What are some repair tips for fixing OBDII code P2123 in a 2013 Nissan Rogue?
- Repair may involve replacing the accelerator pedal position sensor, repairing or replacing damaged wiring, or addressing issues with the electronic throttle control system.
7. Is it possible to reset OBDII code P2123 in a 2013 Nissan Rogue without fixing the underlying issue?
- While you can clear the code with an OBDII scanner, it will likely return if the root cause of the problem is not addressed. It's important to diagnose and fix the issue to prevent further issues.
8. Can a DIY enthusiast address OBDII code P2123 in a 2013 Nissan Rogue?
- Depending on your skill level and access to tools, some DIY enthusiasts may be able to address code P2123 by replacing the accelerator pedal position sensor or repairing wiring. However, professional diagnosis is recommended for accurate repair.
9. How much does it typically cost to fix OBDII code P2123 in a 2013 Nissan Rogue?
- The cost of fixing code P2123 can vary depending on the exact cause of the issue. Expenses may include parts and labor, with costs ranging from a couple of hundred dollars to over a thousand dollars for more complex repairs.
10. Will fixing OBDII code P2123 improve the performance and drivability of my 2013 Nissan Rogue?
- Yes, addressing code P2123 and fixing the underlying issue should improve the performance and drivability of your 2013 Nissan Rogue by resolving acceleration and engine power concerns associated with the accelerator pedal position sensor circuit.
Discuss the causes and fixes for P2123 2013 Nissan Rogue OBDII Code
Code P2123 2013 Nissan Rogue comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
