P2123 2010 Toyota Camry Code - Throttle Pedal Position Sensor/Switch 'D' Circuit Input High
Quick Answer
The Accelerator Pedal Position (APP) sensor is mounted on the accelerator pedal to detect the angle of the accelerator pedal. Common causes include Faulty Accelerator Pedal Position (APP) Sensor, Accelerator Pedal Position (APP) Sensor harness is open or shorted, Accelerator Pedal Position (APP) Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2123 2010 Toyota Camry indicates Throttle Pedal Position Sensor/Switch 'D' Circuit Input High.
- Common causes
- Common causes include Faulty Accelerator Pedal Position (APP) Sensor, Accelerator Pedal Position (APP) Sensor harness is open or shorted, Accelerator Pedal Position (APP) Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2123 2010 Toyota Camry Description
In the accelerator pedal position sensor, the voltage applied to terminals VPA and VPA2 of the Engine Control Module (ECM) changes between 0 V and 5 V in proportion to the angle of the accelerator pedal. The VPA is a signal to indicate the actual accelerator pedal angle and is used for the engine control. VPA2 is used to detect malfunctions of the sensor itself.
The ECM monitors the accelerator pedal angle from VPA and VPA2 signal outputs, and controls the throttle motor based on these signals.
What are the Possible Causes of the DTC P2123 2010 Toyota Camry?
- Faulty Accelerator Pedal Position (APP) Sensor
- Accelerator Pedal Position (APP) Sensor harness is open or shorted
- Accelerator Pedal Position (APP) Sensor circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P2123 2010 Toyota Camry?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2123 2010 Toyota Camry code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2123 2010 Toyota Camry code?
Need more information on how to fix the P2123 2010 Toyota Camry code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2123 2010 Toyota Camry code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2123 2010 Toyota Camry Code
1. What does the OBDII code P2123 mean on a 2010 Toyota Camry?
P2123 indicates a problem with the Throttle Pedal Position Sensor/Switch 'D' Circuit, specifically that the input signal is higher than expected.
2. What are the common symptoms of the P2123 code in a 2010 Toyota Camry?
Symptoms include reduced engine performance, the throttle not responding properly, a lit check engine light, and in some cases, the vehicle may enter "limp mode."
3. What causes the P2123 code to appear?
Possible causes include a faulty throttle pedal position sensor, damaged wiring or connectors, a malfunctioning throttle body, or issues with the Engine Control Module (ECM).
4. Can I drive my 2010 Toyota Camry with a P2123 code?
It is not recommended to drive the vehicle extensively with this code, as it could result in unsafe driving conditions due to reduced throttle response or limp mode activation.
5. How do I fix the P2123 code on my 2010 Toyota Camry?
Repairs may involve replacing the throttle pedal position sensor, repairing or replacing damaged wiring, cleaning or replacing the throttle body, or reprogramming the ECM if necessary.
6. How can I diagnose the P2123 code in my Toyota Camry?
Start by using an OBDII scanner to confirm the code. Then inspect the throttle pedal position sensor, wiring, and connectors for damage or loose connections. Test the sensor with a multimeter if needed.
7. How much does it cost to repair a P2123 code on a 2010 Toyota Camry?
Repair costs can vary; replacing the throttle pedal position sensor typically ranges from $100 to $300, while wiring repairs may cost less. ECM repairs or replacements are more expensive, often exceeding $500.
8. Can cleaning the throttle body fix the P2123 code?
In some cases, cleaning a dirty throttle body may resolve the issue if carbon buildup is causing signal interference, but this is not always the root cause.
9. Is the P2123 code covered under warranty for a 2010 Toyota Camry?
It depends on your specific warranty terms and mileage. Check with your Toyota dealership to confirm coverage for throttle-related components.
10. What tools are needed to troubleshoot the P2123 code?
You’ll need an OBDII scanner, a multimeter to test electrical components, and possibly basic hand tools to access and inspect the throttle pedal position sensor and wiring.
Discuss the causes and fixes for P2123 2010 Toyota Camry OBDII Code
Code P2123 2010 Toyota Camry comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
