P2123 2009 Toyota Camry Code - Throttle Pedal Position Sensor/Switch 'D' Circuit Input High
Quick Answer
The Accelerator Pedal Position (APP) sensor is mounted on the accelerator pedal to detect the angle of the accelerator pedal. Common causes include Faulty Accelerator Pedal Position (APP) Sensor, Accelerator Pedal Position (APP) Sensor harness is open or shorted, Accelerator Pedal Position (APP) Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2123 2009 Toyota Camry indicates Throttle Pedal Position Sensor/Switch 'D' Circuit Input High.
- Common causes
- Common causes include Faulty Accelerator Pedal Position (APP) Sensor, Accelerator Pedal Position (APP) Sensor harness is open or shorted, Accelerator Pedal Position (APP) Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2123 2009 Toyota Camry Description
In the accelerator pedal position sensor, the voltage applied to terminals VPA and VPA2 of the Engine Control Module (ECM) changes between 0 V and 5 V in proportion to the angle of the accelerator pedal. The VPA is a signal to indicate the actual accelerator pedal angle and is used for the engine control. VPA2 is used to detect malfunctions of the sensor itself.
The ECM monitors the accelerator pedal angle from VPA and VPA2 signal outputs, and controls the throttle motor based on these signals.
What are the Possible Causes of the DTC P2123 2009 Toyota Camry?
- Faulty Accelerator Pedal Position (APP) Sensor
- Accelerator Pedal Position (APP) Sensor harness is open or shorted
- Accelerator Pedal Position (APP) Sensor circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P2123 2009 Toyota Camry?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2123 2009 Toyota Camry code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2123 2009 Toyota Camry code?
Need more information on how to fix the P2123 2009 Toyota Camry code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2123 2009 Toyota Camry code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2123 2009 Toyota Camry Code
What does the OBDII code P2123 mean for a 2009 Toyota Camry?
P2123 indicates that the Throttle Pedal Position Sensor/Switch 'D' Circuit is experiencing an input high signal, which means the sensor is sending a voltage reading that is higher than expected.
What are the common symptoms of a P2123 code?
Common symptoms include the check engine light being illuminated, reduced engine power, acceleration issues, or the vehicle entering limp mode to prevent damage.
What could cause the P2123 code to trigger?
Possible causes include a faulty throttle pedal position sensor, wiring issues such as short circuits or open circuits in the harness, or problems with the Engine Control Module (ECM).
How can I diagnose the P2123 code?
To diagnose P2123, use an OBDII scanner to confirm the code, visually inspect the wiring and connectors for damage, test the throttle pedal position sensor with a multimeter, and check the ECM for faults.
What repairs can fix the P2123 code?
Repairs can include replacing the throttle pedal position sensor, fixing any wiring issues, cleaning corroded connectors, or reprogramming or replacing the ECM if necessary.
Is it safe to drive with a P2123 code?
It is not recommended to drive with this code, as it can lead to reduced power and control issues, increasing the risk of an accident.
How much does it typically cost to repair a P2123 code?
Repair costs can vary widely depending on the specific issue, but replacing a throttle pedal position sensor typically ranges from $100 to $300, including parts and labor.
Can I clear the P2123 code without fixing the problem?
While you can clear the code using an OBDII scanner, the code will likely return if the underlying issue is not resolved.
Will clearing the P2123 code reset the check engine light?
Yes, clearing the code will turn off the check engine light temporarily, but if the problem persists, the light will illuminate again once the vehicle's systems are checked.
Discuss the causes and fixes for P2123 2009 Toyota Camry OBDII Code
Code P2123 2009 Toyota Camry comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
