P2123 2009 Nissan Sentra Code - Accelerator Pedal Position Sensor Circuit Range/Performance
Quick Answer
The Accelerator Pedal Position (APP) sensor is installed on the upper end of the accelerator pedal assembly. Common causes include Faulty Accelerator Pedal Position Sensor, Accelerator Pedal Position Sensor harness is open or shorted, Accelerator Pedal Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2123 2009 Nissan Sentra indicates Accelerator Pedal Position Sensor Circuit Range/Performance.
- Common causes
- Common causes include Faulty Accelerator Pedal Position Sensor, Accelerator Pedal Position Sensor harness is open or shorted, Accelerator Pedal Position Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2123 2009 Nissan Sentra Description
Accelerator pedal position sensor has two sensors. These sensors are a kind of potentiometers which transform the accelerator pedal position into output voltage, and emit the voltage signal to the ECM.
In addition, these sensors detect the opening and closing speed of the accelerator pedal and feed the voltage signals to the ECM. The ECM judges the current opening angle of the accelerator pedal from these signals and controls the throttle control motor based on these signals.
Idle position of the accelerator pedal is determined by the ECM receiving the signal from the accelerator pedal position sensor. The ECM uses this signal for the engine operation
such as fuel cut.
What are the Possible Causes of the DTC P2123 2009 Nissan Sentra?
- Faulty Accelerator Pedal Position Sensor
- Accelerator Pedal Position Sensor harness is open or shorted
- Accelerator Pedal Position Sensor circuit poor electrical connection
How to Fix the DTC P2123 2009 Nissan Sentra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2123 2009 Nissan Sentra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2123 2009 Nissan Sentra code?
Need more information on how to fix the P2123 2009 Nissan Sentra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2123 2009 Nissan Sentra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2123 2009 Nissan Sentra Code
What does the OBDII code P2123 mean for a 2009 Nissan Sentra?
The P2123 code indicates a problem with the accelerator pedal position sensor circuit, specifically that the sensor is reporting a voltage that is outside of the expected range or performance.
What are common symptoms of the P2123 code in a 2009 Nissan Sentra?
Common symptoms include reduced engine power, a check engine light illumination, hesitation or stalling during acceleration, and erratic throttle response.
What could cause the P2123 code to trigger in a 2009 Nissan Sentra?
Possible causes include a faulty accelerator pedal position sensor, damaged wiring or connectors in the sensor circuit, or issues with the engine control module (ECM).
How can I diagnose the P2123 code in my 2009 Nissan Sentra?
To diagnose the P2123 code, start by using an OBDII scanner to confirm the code, then inspect the accelerator pedal position sensor and its wiring for damage, and test the sensor’s voltage output against specifications.
Can I drive my 2009 Nissan Sentra with the P2123 code?
While it is possible to drive with the P2123 code, it is not recommended due to potential reduced engine power and safety concerns. It’s best to diagnose and repair the issue promptly.
What repairs are commonly needed to fix the P2123 code?
Common repairs may include replacing the accelerator pedal position sensor, repairing damaged wiring or connectors, or reprogramming or replacing the ECM if it is determined to be faulty.
How can I prevent the P2123 code from occurring again?
To prevent the P2123 code from recurring, ensure regular inspection of the accelerator pedal position sensor, keep wiring and connectors clean and free of corrosion, and address any engine issues promptly.
Will clearing the P2123 code fix the problem?
Clearing the P2123 code will not fix the underlying issue. The code will likely return if the problem is not addressed, so it's important to diagnose and repair the cause.
Is the P2123 code a serious issue for my Nissan Sentra?
Yes, the P2123 code can be serious, as it may lead to reduced power and performance. It's advisable to address it as soon as possible to ensure safe vehicle operation.
Discuss the causes and fixes for P2123 2009 Nissan Sentra OBDII Code
Code P2123 2009 Nissan Sentra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
