P2123 2008 Toyota Camry Code - Throttle Pedal Position Sensor/Switch 'D' Circuit Input High
Quick Answer
The Accelerator Pedal Position (APP) sensor is mounted on the accelerator pedal to detect the angle of the accelerator pedal. Common causes include Faulty Accelerator Pedal Position (APP) Sensor, Accelerator Pedal Position (APP) Sensor harness is open or shorted, Accelerator Pedal Position (APP) Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2123 2008 Toyota Camry indicates Throttle Pedal Position Sensor/Switch 'D' Circuit Input High.
- Common causes
- Common causes include Faulty Accelerator Pedal Position (APP) Sensor, Accelerator Pedal Position (APP) Sensor harness is open or shorted, Accelerator Pedal Position (APP) Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2123 2008 Toyota Camry Description
In the accelerator pedal position sensor, the voltage applied to terminals VPA and VPA2 of the Engine Control Module (ECM) changes between 0 V and 5 V in proportion to the angle of the accelerator pedal. The VPA is a signal to indicate the actual accelerator pedal angle and is used for the engine control. VPA2 is used to detect malfunctions of the sensor itself.
The ECM monitors the accelerator pedal angle from VPA and VPA2 signal outputs, and controls the throttle motor based on these signals.
What are the Possible Causes of the DTC P2123 2008 Toyota Camry?
- Faulty Accelerator Pedal Position (APP) Sensor
- Accelerator Pedal Position (APP) Sensor harness is open or shorted
- Accelerator Pedal Position (APP) Sensor circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P2123 2008 Toyota Camry?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2123 2008 Toyota Camry code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2123 2008 Toyota Camry code?
Need more information on how to fix the P2123 2008 Toyota Camry code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2123 2008 Toyota Camry code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2123 2008 Toyota Camry Code
1. What does the OBDII code P2123 mean on a 2008 Toyota Camry?
The P2123 code indicates a "Throttle Pedal Position Sensor/Switch 'D' Circuit Input High," meaning the throttle pedal position sensor is sending an abnormally high voltage signal to the engine control module (ECM).
2. What are the common symptoms of a P2123 code?
Symptoms include reduced engine power, hesitation or surging during acceleration, an illuminated check engine light, or the vehicle entering "limp mode."
3. What causes the P2123 code to appear?
Common causes include a faulty throttle pedal position sensor, damaged or corroded wiring, loose electrical connections, or a malfunctioning ECM.
4. Can I drive my 2008 Toyota Camry with a P2123 code?
It's not recommended to drive with this code as it can lead to unsafe driving conditions, such as reduced power or erratic throttle response.
5. How do I fix the P2123 code on my vehicle?
Repairs may involve replacing the throttle pedal position sensor, repairing or replacing damaged wiring, cleaning corroded connectors, or reprogramming or replacing the ECM if necessary.
6. How can I diagnose the P2123 code on my 2008 Toyota Camry?
Start by scanning for the code with an OBDII scanner, inspecting the throttle pedal position sensor and its wiring for damage, and testing the sensor's voltage output with a multimeter.
7. What tools do I need to fix the P2123 code?
You may need an OBDII scanner, a digital multimeter, basic hand tools, and possibly wire repair kits or replacement parts like a new throttle pedal position sensor.
8. How much does it cost to repair a P2123 code?
Repair costs can vary but typically range from $100 to $300, depending on whether the issue is a simple wiring fix or requires replacing the throttle pedal position sensor.
9. Can a dirty throttle body cause the P2123 code?
A dirty throttle body is unlikely to cause this code directly, but it may contribute to throttle-related issues. Cleaning the throttle body could help if paired with other repairs.
10. Is the P2123 code specific to Toyota vehicles?
No, the P2123 code is a generic OBDII code that applies to many vehicles, but the exact causes and repairs can vary depending on the make and model.
Discuss the causes and fixes for P2123 2008 Toyota Camry OBDII Code
Code P2123 2008 Toyota Camry comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
