AutoCodes - Infiniti - P2123 2006 INFINITI G35

P2123 2006 INFINITI G35 Code - Accelerator Pedal Position Sensor Circuit Range/Performance

Repair Importance Level: 3/3
Repair Difficulty Level: 2/3
Table of contents

|P2123 2006 INFINITI G35 code possible causes

  • Faulty Accelerator Pedal Position Sensor
  • Accelerator Pedal Position Sensor harness is open or shorted
  • Accelerator Pedal Position Sensor circuit poor electrical connection

|How do I fix the P2123 2006 INFINITI G35 code?

Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.

|Cost of diagnosing the P2123 2006 INFINITI G35 code

Labor: 1.0

The cost of diagnosing the P2123 2006 INFINITI G35 code is 1.0 hour of labor. The auto repair's diagnosis time and labor rates vary by location, vehicle's make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.

|What are P2123 2006 INFINITI G35 code possible symptoms?

  • Engine Light ON (or Service Engine Soon Warning Light)
  • No Accelerator Pedal respsonse

|P2123 2006 INFINITI G35 code description

The Accelerator Pedal Position (APP) sensor is installed on the upper end of the accelerator pedal assembly. The sensor detects the accelerator position and sends a signal to the Engine Control Module (ECM).
Accelerator pedal position sensor has two sensors. These sensors are a kind of potentiometers which transform the accelerator pedal position into output voltage, and emit the voltage signal to the ECM.
In addition, these sensors detect the opening and closing speed of the accelerator pedal and feed the voltage signals to the ECM. The ECM judges the current opening angle of the accelerator pedal from these signals and controls the throttle control motor based on these signals.
Idle position of the accelerator pedal is determined by the ECM receiving the signal from the accelerator pedal position sensor. The ECM uses this signal for the engine operation
such as fuel cut.
OBDII Code P2123 2006 Infiniti G35 - Accelerator Pedal Position Sensor Circuit Range/Performance - AutoCodes.com

|Need more information with the P2123 2006 INFINITI G35 code?

Need more information on how to fix the P2123 2006 INFINITI G35 code? Get Access to Factory Service Manuals

|Need help with a P2123 2006 INFINITI G35 code?

Get the P2123 2006 Infiniti G35 code diagnosed by a professional: Find a repair shop in your area

|P2123 2006 INFINITI G35 code comments

Help us improve AutoCodes.com. Leave a comment below or tell us if the information above helps you fix the code. What are the symptoms on your vehicle for the P2123 2006 Infiniti G35 code? Have you replaced any parts?
Any information is appreciated. Thanks
Top ⇧
Repair Importance Level: 3
 
1=Low 2=Medium 3=High What is this?
Repair Difficulty Level: 2
 
1=Easy 2=Moderate 3=Hard What is this?