P2123 2005 Toyota Highlander Code - Throttle Pedal Position Sensor/Switch 'D' Circuit Input High
Quick Answer
The Accelerator Pedal Position (APP) sensor is mounted on the accelerator pedal to detect the angle of the accelerator pedal. Common causes include Faulty Accelerator Pedal Position (APP) Sensor, Accelerator Pedal Position (APP) Sensor harness is open or shorted, Accelerator Pedal Position (APP) Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2123 2005 Toyota Highlander indicates Throttle Pedal Position Sensor/Switch 'D' Circuit Input High.
- Common causes
- Common causes include Faulty Accelerator Pedal Position (APP) Sensor, Accelerator Pedal Position (APP) Sensor harness is open or shorted, Accelerator Pedal Position (APP) Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2123 2005 Toyota Highlander Description
In the accelerator pedal position sensor, the voltage applied to terminals VPA and VPA2 of the Engine Control Module (ECM) changes between 0 V and 5 V in proportion to the angle of the accelerator pedal. The VPA is a signal to indicate the actual accelerator pedal angle and is used for the engine control. VPA2 is used to detect malfunctions of the sensor itself.
The ECM monitors the accelerator pedal angle from VPA and VPA2 signal outputs, and controls the throttle motor based on these signals.
What are the Possible Causes of the DTC P2123 2005 Toyota Highlander?
- Faulty Accelerator Pedal Position (APP) Sensor
- Accelerator Pedal Position (APP) Sensor harness is open or shorted
- Accelerator Pedal Position (APP) Sensor circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P2123 2005 Toyota Highlander?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2123 2005 Toyota Highlander code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2123 2005 Toyota Highlander code?
Need more information on how to fix the P2123 2005 Toyota Highlander code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2123 2005 Toyota Highlander code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2123 2005 Toyota Highlander Code
1. What are the common symptoms of OBDII code P2123 in a 2005 Toyota Highlander?
- Common symptoms include reduced engine power, hesitation or surging during acceleration, and the vehicle going into limp mode.
2. What does the OBDII code P2123 for a 2005 Toyota Highlander indicate?
- The code P2123 indicates an issue with the Throttle Pedal Position Sensor/Switch 'D' Circuit Input High.
3. What are the possible causes of OBDII code P2123 in a 2005 Toyota Highlander?
- Possible causes include a faulty throttle pedal position sensor, damaged wiring or connectors in the circuit, or a malfunctioning Engine Control Module (ECM).
4. How can I diagnose the cause of OBDII code P2123 in my 2005 Toyota Highlander?
- You can diagnose the issue by inspecting the throttle pedal position sensor, checking the wiring for damage, and using a scan tool to monitor sensor readings and ECM data.
5. Can I still drive my 2005 Toyota Highlander with OBDII code P2123?
- It is not recommended to drive the vehicle with code P2123 as it can lead to potential safety hazards and further damage to the engine components.
6. How can I repair OBDII code P2123 in my 2005 Toyota Highlander?
- Repair options include replacing the throttle pedal position sensor, repairing any damaged wiring or connectors, and resetting the ECM to clear the code.
7. Will OBDII code P2123 reset itself after repairs are made to a 2005 Toyota Highlander?
- In some cases, the code may reset itself after repairs are made, but it is recommended to use a scan tool to clear the code manually to ensure proper functioning of the system.
8. Can a DIY enthusiast fix OBDII code P2123 in a 2005 Toyota Highlander?
- Depending on the level of expertise, a DIY enthusiast may be able to fix the issue by following repair guides and using the necessary tools to diagnose and replace components.
9. What is the typical cost to repair OBDII code P2123 in a 2005 Toyota Highlander at a mechanic or dealership?
- The cost of repair can vary but typically ranges from $150 to $400, including parts and labor, when repaired at a mechanic or dealership.
10. Are there any preventive measures to avoid OBDII code P2123 in a 2005 Toyota Highlander?
- Regular maintenance of the throttle system, checking for any signs of wear or damage, and addressing any issues promptly can help prevent the occurrence of code P2123.
Discuss the causes and fixes for P2123 2005 Toyota Highlander OBDII Code
Code P2123 2005 Toyota Highlander comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
