AutoCodes – Toyota – P2122 2014 Toyota RAV4

P2122 2014 Toyota RAV4 Code - Throttle Pedal Position Sensor/Switch 'D' Circuit Input Low

Quick Answer

The Accelerator Pedal Position (APP) sensor is built into the accelerator pedal sensor assembly and has 2 sensor circuits: VPA (main) and VPA2 (sub). Common causes include Faulty Accelerator Pedal Position (APP) Sensor, Accelerator Pedal Position Sensor harness is open or shorted, Accelerator Pedal Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2122 2014 Toyota RAV4 indicates Throttle Pedal Position Sensor/Switch 'D' Circuit Input Low.
Common causes: Common causes include Faulty Accelerator Pedal Position (APP) Sensor, Accelerator Pedal Position Sensor harness is open or shorted, Accelerator Pedal Position Sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 270

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Sep 17, 2022

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2122 2014 Toyota RAV4 Description

The Accelerator Pedal Position (APP) sensor is built into the accelerator pedal sensor assembly and has 2 sensor circuits: VPA (main) and VPA2 (sub). This sensor is a non-contact type sensor and uses Hall-effect elements in order to yield accurate signals even in extreme driving conditions, such as at high speeds as well as very low speeds. The voltage, which is applied to terminals VPA and VPA2 of the Engine Control Module (ECM), varies between 0.5 V and 4.75 V in proportion to the operating angle of the accelerator pedal (throttle valve). A signal from VPA indicates the actual accelerator pedal opening angle (throttle valve opening angle) and is used for engine control. A signal from VPA2 conveys the status of the VPA circuit and is used to check the accelerator pedal position sensor itself.
The ECM monitors the actual accelerator pedal opening angle (throttle valve opening angle) through the signals from VPA and VPA2 and controls the throttle actuator according to these signals.
When either the output voltage of VPA or VPA2 deviates from the standard range, or the difference between the output voltages of the 2 sensor circuits is more than the threshold, the ECM determines that there is a malfunction in the accelerator pedal position sensor. The ECM then illuminates the MIL and stores a Diagnostic Trouble Code (DTC).

OBDII Code P2122 2014 Toyota RAV4 - Throttle Pedal Position Sensor/Switch 'D' Circuit Input Low - AutoCodes.com — P2122 2014 Toyota RAV4 Code - Throttle Pedal Position Sensor/Switch 'D' Circuit Input Low

What does this mean?

What are the Possible Causes of the DTC P2122 2014 Toyota RAV4?

Faulty Accelerator Pedal Position (APP) Sensor
Accelerator Pedal Position Sensor harness is open or shorted
Accelerator Pedal Position Sensor circuit poor electrical connection
Faulty Engine Control Module (ECM)

How to Fix the DTC P2122 2014 Toyota RAV4?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2122 2014 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2122 2014 Toyota RAV4 code?

Need more information on how to fix the P2122 2014 Toyota RAV4 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2122 2014 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2122 2014 Toyota RAV4 Code

1. What are the common symptoms of OBDII code P2122 in a 2014 Toyota RAV4?

- Common symptoms include reduced engine power, hesitation or stalling when accelerating, and the vehicle going into limp mode.

2. What does the OBDII code P2122 mean for a 2014 Toyota RAV4?

- The code P2122 indicates an issue with the Throttle Pedal Position Sensor/Switch 'D' Circuit Input being lower than expected.

3. What are the possible causes of OBDII code P2122 in a 2014 Toyota RAV4?

- Possible causes include a faulty throttle pedal position sensor, damaged wiring or connectors in the circuit, or issues with the engine control module.

4. How can I diagnose the OBDII code P2122 in my 2014 Toyota RAV4?

- Diagnosing the code may involve checking the throttle pedal position sensor's voltage output, inspecting the wiring for any damage, and scanning the vehicle's computer for related error codes.

5. Can I continue driving my 2014 Toyota RAV4 with OBDII code P2122?

- It is not recommended to drive the vehicle with this code present, as it may lead to unsafe driving conditions and potential engine damage.

6. How can I repair OBDII code P2122 in my 2014 Toyota RAV4?

- Repair options may include replacing the throttle pedal position sensor, repairing any damaged wiring or connectors, or resetting the engine control module.

7. Will resetting the check engine light resolve OBDII code P2122 in a 2014 Toyota RAV4?

- Resetting the check engine light may temporarily clear the code, but it is crucial to address the underlying issue causing the code for a lasting solution.

8. Are there any DIY tips for fixing OBDII code P2122 in a 2014 Toyota RAV4?

- DIY tips may include checking and cleaning the throttle pedal sensor connections, ensuring proper wiring connections, and conducting a visual inspection for any obvious issues.

9. How much does it typically cost to repair OBDII code P2122 in a 2014 Toyota RAV4?

- The cost of repairing the code P2122 can vary depending on the exact cause, but it may range from a few hundred dollars for parts and labor.

10. Is OBDII code P2122 a common issue in 2014 Toyota RAV4 vehicles?

- While not extremely common, issues related to the throttle pedal position sensor can occur in some 2014 Toyota RAV4 vehicles, leading to the code P2122.