P2121 2007 FORD FUSION - Throttle/Pedal Position Sensor/Switch 'D' Circuit Range/Performance
P2121 2007 Ford Fusion DescriptionThe Accelerator Pedal Position (APP) sensor is an input to the Powertrain Control Module (PCM) and used to determine the amount of torque requested by the operator. There are 2 pedal position signals in the sensor. Both signals, APP and APP2, have a positive slope (increasing angle, increasing voltage), but are offset and increase at different rates. The 2 pedal position signals make sure the PCM receives a correct input even if 1 signal has a concern. The PCM determines if a signal is incorrect by calculating where it should be, inferred from the other signals. If a concern is present with one of the circuits the other input is used. There are 2 reference voltage circuits, 2 signal return circuits, and 2 signal circuits (a total of 6 circuits and pins) between the PCM and the APP sensor assembly. The pedal position signal is converted to pedal travel degrees (rotary angle) by the PCM. The software converts these degrees to counts, which is the input to the torque based strategy. The APP sensor fault flag is set for sensor 1 by the PCM, indicating the signal is out of the normal self-test operating range.
Need more help?Do you need more help with the P2121 2007 Ford Fusion code? Ask a question to our users or find an automotive repair shop near you to help fix the OBDII code
P2121 2007 FORD FUSION CommentsHelp us improve AutoCodes.com. Leave a comment below or tell us if the information above help you fix the code. What are the symptoms on your vehicle for the P2121 2007 Ford Fusion code? Have you replaced any parts?
Any information is appreciated. Thanks