AutoCodes – Ford – P2121 2006 Ford Fusion

P2121 2006 Ford Fusion Code - Throttle/Pedal Position Sensor/Switch 'D' Circuit Range/Performance

Quick Answer

The Accelerator Pedal Position (APP) sensor is an input to the Powertrain Control Module (PCM) and used to determine the amount of torque requested by the operator. Common causes include Faulty Accelerator Pedal Position (APP) Sensor, Accelerator Pedal Position (APP) Sensor harness is open or shorted, Accelerator Pedal Position (APP) Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2121 2006 Ford Fusion indicates Throttle/Pedal Position Sensor/Switch 'D' Circuit Range/Performance.
Common causes: Common causes include Faulty Accelerator Pedal Position (APP) Sensor, Accelerator Pedal Position (APP) Sensor harness is open or shorted, Accelerator Pedal Position (APP) Sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 2,777

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 14, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2121 2006 Ford Fusion Description

The Accelerator Pedal Position (APP) sensor is an input to the Powertrain Control Module (PCM) and used to determine the amount of torque requested by the operator. There are 2 pedal position signals in the sensor. Both signals, APP and APP2, have a positive slope (increasing angle, increasing voltage), but are offset and increase at different rates. The 2 pedal position signals make sure the PCM receives a correct input even if 1 signal has a concern. The PCM determines if a signal is incorrect by calculating where it should be, inferred from the other signals. If a concern is present with one of the circuits the other input is used. There are 2 reference voltage circuits, 2 signal return circuits, and 2 signal circuits (a total of 6 circuits and pins) between the PCM and the APP sensor assembly. The pedal position signal is converted to pedal travel degrees (rotary angle) by the PCM. The software converts these degrees to counts, which is the input to the torque based strategy. The APP sensor fault flag is set for sensor 1 by the PCM, indicating the signal is out of the normal self-test operating range.

OBDII Code P2121 2006 Ford Fusion - Throttle/Pedal Position Sensor/Switch 'D' Circuit Range/Performance - AutoCodes.com — P2121 2006 Ford Fusion Code - Throttle/Pedal Position Sensor/Switch 'D' Circuit Range/Performance

What does this mean?

What are the Possible Causes of the DTC P2121 2006 Ford Fusion?

Faulty Accelerator Pedal Position (APP) Sensor
Accelerator Pedal Position (APP) Sensor harness is open or shorted
Accelerator Pedal Position (APP) Sensor circuit poor electrical connection
Faulty Powertrain Control Module (PCM)

How to Fix the DTC P2121 2006 Ford Fusion?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2121 2006 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2121 2006 Ford Fusion code?

Need more information on how to fix the P2121 2006 Ford Fusion code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2121 2006 Ford Fusion code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2121 2006 Ford Fusion Code

1. What are common symptoms of OBDII code P2121 in a 2006 Ford Fusion?

- Common symptoms include issues with acceleration, reduced engine power, stalling, and difficulty maintaining speed.

2. What does the Throttle/Pedal Position Sensor/Switch 'D' Circuit Range/Performance error code P2121 indicate in a 2006 Ford Fusion?

- This code indicates that there is a problem with the circuit range or performance of the throttle/pedal position sensor or switch 'D'.

3. What are possible causes of OBDII code P2121 in a 2006 Ford Fusion?

- Possible causes include a faulty throttle position sensor, damaged wiring or connectors, a malfunctioning throttle body, or issues with the engine control module (ECM).

4. How can I diagnose the Throttle/Pedal Position Sensor/Switch 'D' Circuit Range/Performance code P2121 in my 2006 Ford Fusion?

- You can diagnose this code by using an OBDII scanner to read the code, checking the throttle position sensor for proper operation, inspecting wiring and connectors for damage, and testing the throttle body.

5. Can I drive my 2006 Ford Fusion with OBDII code P2121?

- It is not recommended to drive your vehicle with this code as it can lead to performance issues and potential safety hazards. It is best to address the issue promptly.

6. How do I repair OBDII code P2121 in a 2006 Ford Fusion?

- Repair options may include replacing the throttle position sensor, repairing damaged wiring or connectors, cleaning or replacing the throttle body, or reprogramming the ECM.

7. Is it possible to reset OBDII code P2121 in a 2006 Ford Fusion by disconnecting the battery?

- Disconnecting the battery may clear the code temporarily, but it is not a permanent solution. It is important to diagnose and address the underlying issue causing the code.

8. Can a DIY enthusiast fix OBDII code P2121 in a 2006 Ford Fusion?

- Depending on your skill level and access to tools, you may be able to address this code yourself by following repair guides or seeking assistance from online forums.

9. How much does it typically cost to repair OBDII code P2121 in a 2006 Ford Fusion at a mechanic?

- The cost of repairs can vary depending on the specific cause of the code, but it may range from $100 to $500 or more, including parts and labor.

10. Will OBDII code P2121 in a 2006 Ford Fusion cause the check engine light to illuminate?

- Yes, this code will trigger the check engine light to illuminate on the dashboard of your 2006 Ford Fusion to alert you to the issue with the throttle/pedal position sensor/switch 'D'.