AutoCodes – Toyota – P2119 2013 Toyota RAV4

P2119 2013 Toyota RAV4 Code - Throttle Actuator Control Throttle Body Range / Performance

Quick Answer

The Electric Throttle Control System (ETCS) is composed of the throttle actuator, throttle position sensor, accelerator pedal position sensor, and Engine Control Module (ECM). Common causes include Faulty Throttle with Motor Body Assembly, Throttle with Motor Body Assembly harness is open or shorted, Throttle with Motor Body Assembly circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2119 2013 Toyota RAV4 indicates Throttle Actuator Control Throttle Body Range / Performance.
Common causes: Common causes include Faulty Throttle with Motor Body Assembly, Throttle with Motor Body Assembly harness is open or shorted, Throttle with Motor Body Assembly circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 402

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Sep 17, 2022

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2119 2013 Toyota RAV4 Description

The Electric Throttle Control System (ETCS) is composed of the throttle actuator, throttle position sensor, accelerator pedal position sensor, and Engine Control Module (ECM). The ECM operates the throttle actuator to regulate the throttle valve in response to driver inputs. The throttle position sensor detects the opening angle of the throttle valve and provides the ECM with feedback so that the throttle valve can be appropriately controlled by the ECM.
The ECM determines the actual opening angle of the throttle valve from the throttle position sensor signal. The actual opening angle is compared to the target opening angle commanded by the ECM. If the difference between these two values is outside the standard range, the ECM interprets this as a malfunction in the electronic throttle control system. The ECM then illuminates the MIL and stores the Diagnostic Trouble Code (DTC).

OBDII Code P2119 2013 Toyota RAV4 - Throttle Actuator Control Throttle Body Range / Performance - AutoCodes.com — P2119 2013 Toyota RAV4 Code - Throttle Actuator Control Throttle Body Range / Performance

What does this mean?

What are the Possible Causes of the DTC P2119 2013 Toyota RAV4?

Faulty Throttle with Motor Body Assembly
Throttle with Motor Body Assembly harness is open or shorted
Throttle with Motor Body Assembly circuit poor electrical connection
Faulty Engine Control Module (ECM)

How to Fix the DTC P2119 2013 Toyota RAV4?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2119 2013 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2119 2013 Toyota RAV4 code?

Need more information on how to fix the P2119 2013 Toyota RAV4 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2119 2013 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2119 2013 Toyota RAV4 Code

1. What are the common symptoms of OBDII code P2119 in a 2013 Toyota RAV4?

The common symptoms include reduced engine power, engine stalling, and the vehicle going into limp mode.

2. What can cause the OBDII code P2119 in a 2013 Toyota RAV4?

The code P2119 is usually triggered by a faulty throttle actuator control system, issues with the throttle body, or wiring problems.

3. How can I diagnose the OBDII code P2119 in my 2013 Toyota RAV4?

Diagnosing the code may involve using a scan tool to check for the specific error code, inspecting the throttle body for any obstructions, and testing the throttle actuator control system.

4. Is it safe to drive my 2013 Toyota RAV4 with OBDII code P2119 active?

It is not recommended to drive the vehicle with the code active as it can lead to reduced engine performance and potential safety hazards.

5. Can I repair the OBDII code P2119 in my 2013 Toyota RAV4 myself?

If you have experience working on automotive systems, you may be able to repair the code yourself by checking and fixing any issues with the throttle actuator control system or throttle body.

6. How much does it cost to repair OBDII code P2119 in a 2013 Toyota RAV4?

The cost of repairing the code can vary depending on the extent of the issue, but it may involve replacing the throttle body, throttle actuator, or addressing wiring problems.

7. Will resetting the OBDII code P2119 in my 2013 Toyota RAV4 make it go away permanently?

Resetting the code may temporarily clear the error, but if the underlying issue is not fixed, the code is likely to reappear.

8. Can a dirty throttle body cause the OBDII code P2119 in a 2013 Toyota RAV4?

Yes, a dirty or clogged throttle body can cause issues with the throttle actuator control system, triggering the P2119 code.

9. What are some preventive maintenance tips to avoid triggering OBDII code P2119 in my 2013 Toyota RAV4?

Regularly cleaning and inspecting the throttle body, ensuring proper airflow, and addressing any warning signs promptly can help prevent the code from appearing.

10. How long does it take to repair OBDII code P2119 in a 2013 Toyota RAV4?

The repair time can vary depending on the exact cause of the code, but it may take a few hours to a day for a skilled mechanic to diagnose and fix the issue.