P2119 2008 NISSAN ROGUE - Electric Throttle Control Actuator
Tech notesTry to clean throttle body, adjust engine idle and erase engine code. If the code comes back you may have to replace the Electric Throttle Control Actuator (Motor) to repair the problem.
Nissan Rogue Idle Air Volume Relearn
When is the code detected?The P2119 code is detected when electric throttle control actuator does not function properly due to the return spring malfunction or Engine Control Module (ECM) detect the throttle valve is stuck open.
P2119 2008 Nissan Rogue DescriptionElectric throttle control actuator consists of throttle control motor, throttle position sensor, etc. The throttle control motor is operated by the Engine Control Module (ECM) and it opens and closes the throttle valve.
The throttle position sensor detects the throttle valve position, and feeds the voltage signal to the ECM. The ECM judges the current opening angle of the throttle valve and controls the throttle valve opening angle in response to driving conditions via the throttle control motor.
Need more help?Get the P2119 2008 Nissan Rogue code diagnosed by a professional: Find a repair shop in you area
P2119 2008 NISSAN ROGUE CommentsHelp us improve AutoCodes.com. Leave a comment below or tell us if the information above help you fix the code. What are the symptoms on your vehicle for the P2119 2008 Nissan Rogue code? Have you replaced any parts?
Any information is appreciated. Thanks