AutoCodes - Toyota - P2118 2010 TOYOTA CAMRY

P2118 2010 TOYOTA CAMRY Code - Throttle Actuator Control Motor Current Range/Performance

Repair Importance Level: 3/3
Repair Difficulty Level: 2/3
Table of contents

|P2118 2010 TOYOTA CAMRY code possible causes

  • Faulty Throttle Actuator Control Actuator
  • Battery
  • Electronic Throttle Control System (ETCS) harness is open or shorted
  • Electronic Throttle Control System (ETCS) circuit poor electrical connection
  • ETCS fuse
  • ECM

|How do I fix the P2118 2010 TOYOTA CAMRY code?

Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.

|Cost of diagnosing the P2118 2010 TOYOTA CAMRY code

Labor: 1.0

The cost of diagnosing the P2118 2010 TOYOTA CAMRY code is 1.0 hour of labor. The auto repair's diagnosis time and labor rates vary by location, vehicle's make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.

|When is the P2118 2010 TOYOTA CAMRY code detected?

The Engine Control Module (ECM) monitors the battery supply voltage applied to the electronic throttle actuator. When the power supply voltage drops below the threshold, the ECM concludes that the power supply circuit has an open circuit. A DTC is set and the MIL is turned on.

|What are P2118 2010 TOYOTA CAMRY code possible symptoms?

  • Engine Light ON (or Service Engine Soon Warning Light)

|P2118 2010 TOYOTA CAMRY code description

The Electronic Throttle Control System (ETCS) has a dedicated power supply circuit. The voltage (+BM) is monitored and when the voltage is low (less than 4 V), the Engine Control Module (ECM) concludes that the ETCS has a fault and current to the throttle actuator is cut. When the voltage becomes unstable, the ETCS itself becomes unstable. For this reason, when the voltage is low, the current to the actuator is cut. If repairs are made and the system has returned to normal, turn the ignition switch OFF. The ECM then allows current to flow to the actuator and actuator can be restarted.
OBDII Code P2118 2010 Toyota Camry - Throttle Actuator Control Motor Current Range/Performance - AutoCodes.com

|Need more information with the P2118 2010 TOYOTA CAMRY code?

Need more information on how to fix the P2118 2010 TOYOTA CAMRY code? Get Access to Factory Service Manuals

|Need help with a P2118 2010 TOYOTA CAMRY code?

Get the P2118 2010 Toyota Camry code diagnosed by a professional: Find a repair shop in your area

|P2118 2010 TOYOTA CAMRY code comments

Help us improve AutoCodes.com. Leave a comment below or tell us if the information above helps you fix the code. What are the symptoms on your vehicle for the P2118 2010 Toyota Camry code? Have you replaced any parts?
Any information is appreciated. Thanks
Top ⇧
Repair Importance Level: 3
 
1=Low 2=Medium 3=High What is this?
Repair Difficulty Level: 2
 
1=Easy 2=Moderate 3=Hard What is this?