AutoCodes – Ford – P2112 2009 Ford Fusion

P2112 2009 Ford Fusion Code - Throttle Actuator Control System - Stuck Closed

Quick Answer

The electronic Throttle Actuator Control (TAC) is a DC motor controlled by the Powertrain Control Module (PCM). Common causes include Throttle Body Plate Binding, Faulty Throttle Actuator Control (TAC) Motor, Throttle Actuator Control (TAC) Motor harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2112 2009 Ford Fusion indicates Throttle Actuator Control System - Stuck Closed.
Common causes: Common causes include Throttle Body Plate Binding, Faulty Throttle Actuator Control (TAC) Motor, Throttle Actuator Control (TAC) Motor harness is open or shorted.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 5,220

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Mar 06, 2019

Description
Possible Causes
How To Fix
Tech Notes ▶
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2112 2009 Ford Fusion Description

The electronic Throttle Actuator Control (TAC) is a DC motor controlled by the Powertrain Control Module (PCM). There are 2 designs for the TAC, parallel and inline. The parallel design has the motor under the bore parallel to the plate shaft. The motor housing is integrated into the main housing. The inline design has a separate motor housing. An internal spring is used in both designs to return the throttle plate to a default position. The default position is typically a throttle angle of 7 to 8 degrees from the hard stop angle. The closed throttle plate hard stop prevents the throttle from binding in the bore. This hard stop setting is not adjustable and is set to result in less airflow than the minimum engine airflow required at idle. The P2112 code is set when the throttle plate is at a lower angle than commanded.

OBDII Code P2112 2009 Ford Fusion - Throttle Actuator Control System - Stuck Closed - AutoCodes.com — P2112 2009 Ford Fusion Code - Throttle Actuator Control System - Stuck Closed

What does this mean?

What are the Possible Causes of the DTC P2112 2009 Ford Fusion?

Throttle Body Plate Binding
Faulty Throttle Actuator Control (TAC) Motor
Throttle Actuator Control (TAC) Motor harness is open or shorted
Throttle Actuator Control (TAC) Motor circuit poor electrical connection
Faulty Powertrain Control Module (PCM)

How to Fix the DTC P2112 2009 Ford Fusion?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

User Submitted Video

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2112 2009 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2112 2009 Ford Fusion code?

Need more information on how to fix the P2112 2009 Ford Fusion code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2112 2009 Ford Fusion code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2112 2009 Ford Fusion Code

1. What does the OBDII code P2112 mean on a 2009 Ford Fusion?

P2112 indicates that the Throttle Actuator Control System is stuck in the closed position, preventing proper airflow to the engine.

2. What are the common symptoms of a P2112 code in a Ford Fusion?

Symptoms include reduced engine performance, difficulty accelerating, stalling, a lack of throttle response, and the check engine light turning on.

3. What causes the P2112 code to appear on a 2009 Ford Fusion?

Common causes include a malfunctioning throttle body, a stuck throttle plate, wiring issues, or a faulty throttle actuator motor.

4. Can I drive my 2009 Ford Fusion with a P2112 code?

Driving with a P2112 code is not recommended, as the car may stall or fail to accelerate properly, posing a safety risk.

5. How can I fix a P2112 code on my Ford Fusion?

Fixes may include cleaning or replacing the throttle body, repairing or replacing damaged wiring, or replacing the throttle actuator control motor.

6. How do I diagnose the P2112 code on a 2009 Ford Fusion?

Use an OBDII scanner to confirm the code, inspect the throttle body for dirt or damage, check wiring for frays or corrosion, and test the throttle actuator motor.

7. Can a dirty throttle body cause the P2112 code?

Yes, a dirty or carbon-clogged throttle body can cause the throttle plate to stick, leading to a P2112 code.

8. How much does it cost to repair a P2112 code on a 2009 Ford Fusion?

Repair costs vary, but cleaning the throttle body may cost $50-$100, while replacing the throttle body or actuator could cost $300-$600.

9. Does a software update fix the P2112 code on a Ford Fusion?

In rare cases, a PCM (Powertrain Control Module) software update may resolve the code, but physical issues with the throttle body or wiring are more common.

10. What tools do I need to fix the P2112 code on my 2009 Ford Fusion?

You may need an OBDII scanner, basic hand tools, throttle body cleaner, and a multimeter to diagnose and fix the issue.