P2112 2006 FORD FUSION - Throttle Actuator Control System - Stuck Closed
- Throttle Body Plate Binding
- Faulty Throttle Actuator Control (TAC) Motor
- Throttle Actuator Control (TAC) Motor harness is open or shorted
- Throttle Actuator Control (TAC) Motor circuit poor electrical connection
- Faulty Powertrain Control Module (PCM)
User Submitted Video
When is the code detected?Throttle valve locked during Engine Control Module (ECM) order to open
- Engine Light ON (or Service Engine Soon Warning Light)
P2112 2006 Ford Fusion DescriptionThe electronic Throttle Actuator Control (TAC) is a DC motor controlled by the Powertrain Control Module (PCM). There are 2 designs for the TAC, parallel and inline. The parallel design has the motor under the bore parallel to the plate shaft. The motor housing is integrated into the main housing. The inline design has a separate motor housing. An internal spring is used in both designs to return the throttle plate to a default position. The default position is typically a throttle angle of 7 to 8 degrees from the hard stop angle. The closed throttle plate hard stop prevents the throttle from binding in the bore. This hard stop setting is not adjustable and is set to result in less airflow than the minimum engine airflow required at idle. The P2112 code is set when the throttle plate is at a lower angle than commanded.
Need more help?Get the P2112 2006 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
P2112 2006 FORD FUSION CommentsHelp us improve AutoCodes.com. Leave a comment below or tell us if the information above help you fix the code. What are the symptoms on your vehicle for the P2112 2006 Ford Fusion code? Have you replaced any parts?
Any information is appreciated. Thanks