P2111 Lexus Code - Throttle Actuator Control System Stuck Open
Quick Answer
The throttle actuator is operated by the Engine Control Module (ECM) and opens and closes the throttle valve using gears. Common causes include Dirty throttle body, Faulty Throttle Actuator, Throttle Actuator harness is open. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2111 Lexus indicates Throttle Actuator Control System Stuck Open.
- Common causes
- Common causes include Dirty throttle body, Faulty Throttle Actuator, Throttle Actuator harness is open.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2111 Lexus Description
The ECM determines that there is a malfunction in the Electronic Throttle Control System (ETCS) when the throttle valve remains at a fixed angle despite a high drive current from the ECM. The ECM illuminates the MIL and stores a Diagnostic Trouble Code (DTC).
What are the Possible Causes of the DTC P2111 Lexus?
- Dirty throttle body
- Faulty Throttle Actuator
- Throttle Actuator harness is open
- Throttle Actuator circuit poor electrical connection
- Faulty Throttle with Motor Body Assembly
- Faulty Engine Control Module (ECM)
How to Fix the DTC P2111 Lexus?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2111 Lexus code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2111 Lexus code?
Need more information on how to fix the P2111 Lexus code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2111 Lexus code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2111 Lexus Code
1. What does the OBDII code P2111 mean on a Lexus?
P2111 indicates that the Throttle Actuator Control System is stuck open, meaning the throttle plate is not responding as expected to input commands.
2. What are the common symptoms of code P2111 in a Lexus?
Common symptoms include reduced engine power, poor acceleration, rough idling, engine stalling, and the Check Engine Light turning on.
3. What causes the P2111 code to appear in a Lexus?
Possible causes include a malfunctioning throttle body, carbon buildup around the throttle plate, a faulty throttle actuator motor, damaged wiring, or an issue with the Engine Control Module (ECM).
4. Can I drive my Lexus with the P2111 code?
Driving with the P2111 code is not recommended, as it can lead to reduced power, stalling, or unsafe driving conditions.
5. How do I fix the P2111 code on my Lexus?
Repairs may include cleaning or replacing the throttle body, repairing damaged wiring, or replacing the throttle actuator motor. A thorough diagnosis is required to identify the root cause.
6. How much does it cost to repair the P2111 code on a Lexus?
Repair costs can range from $100 for a throttle body cleaning to $500 or more for throttle body replacement, depending on the extent of the issue.
7. Can a dirty throttle body cause the P2111 code in a Lexus?
Yes, carbon buildup or dirt around the throttle plate can prevent it from opening or closing properly, triggering the P2111 code.
8. How can I prevent the P2111 code from recurring in my Lexus?
Regular maintenance, such as cleaning the throttle body and inspecting wiring for damage, can help prevent the P2111 code from recurring.
9. Will resetting the Check Engine Light fix the P2111 code in a Lexus?
Resetting the light will not fix the underlying issue. The root cause must be diagnosed and repaired to resolve the P2111 code.
10. Is the P2111 code related to the throttle position sensor in a Lexus?
Yes, a malfunctioning throttle position sensor or its circuit can cause the throttle actuator to behave abnormally, potentially triggering the P2111 code.
Discuss the causes and fixes for P2111 Lexus OBDII Code
-
Car rolls over but will not start the engine immobilizer system lite is on the dash but the only code is p2111
-
The P2111 - Throttle Actuator Control System Stuck Open code on your Lexus indicates that the throttle body is not functioning correctly and may be stuck in the open position. Since you're also seeing the engine immobilizer light on the dashboard, it's possible that the immobilizer system is preventing the engine from starting, but the P2111 code could be contributing to the issue as well.
Steps to Diagnose and Fix the Issue:
1. Check the Immobilizer System First:
- Since the immobilizer light is on, the vehicle's security system might not be recognizing your key, preventing the engine from starting.
- Try the following:
- Use a spare key if available.
- Remove and reinsert the key fob or hold it close to the start button (if push-to-start).
- Disconnect the battery for a few minutes to reset the immobilizer system, then try starting the vehicle.
- If the issue persists, the immobilizer system may need to be reprogrammed by a Lexus dealer or a professional locksmith with the appropriate diagnostic tools.
2. Inspect the Throttle Body:
- The P2111 code suggests the throttle body may be stuck open, causing an air-fuel imbalance that could prevent the engine from starting.
- What to do:
- Remove the throttle body and inspect it for carbon buildup or debris.
- Clean the throttle body carefully with throttle body cleaner and a soft cloth.
- Ensure the throttle plate moves freely when pushed manually.
- Reinstall and reconnect everything properly.
3. Check Throttle Position Sensor (TPS):
- A faulty TPS could send incorrect signals to the engine control module (ECM), triggering the P2111 code and affecting engine start.
- Action: Use an OBDII scanner with live data to check throttle position values and ensure they change when the throttle is moved.
4. Inspect Wiring and Connectors:
- Loose or damaged wiring related to the throttle actuator or ECM could be causing the issue.
- Steps:
- Inspect the throttle body harness for damage, corrosion, or loose connections.
- Check fuses related to the electronic throttle control (ETC) system.
5. Perform a Throttle Relearn Procedure:
- If you've cleaned or replaced the throttle body, the ECM may need to relearn the throttle position.
- Steps to try:
- Turn the ignition to "ON" (without starting the engine) for about 30 seconds.
- Turn off and wait a few minutes before trying to start the engine.
6. Clear the Code and Attempt a Restart:
- Use an OBDII scanner to clear the code and see if the problem persists.
- If the code returns immediately after clearing, further investigation of the throttle actuator motor or ECM may be required.
If the Issue Persists:
If you've tried these steps and the car still won’t start, it might be necessary to have the vehicle diagnosed with a Lexus-compatible scan tool to check immobilizer system faults and throttle control module operation.
Let us know if any of these steps help, or if you need further guidance!
-
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
