AutoCodes – Ford – P2111 2008 Ford Fusion

P2111 2008 Ford Fusion Code - Throttle Actuator Control System - Stuck Open

Quick Answer

The electronic Throttle Actuator Control (TAC) is a DC motor controlled by the Powertrain Control Module (PCM). Common causes include Throttle Body Plate Binding, Faulty Throttle Actuator Control (TAC) Motor, Throttle Actuator Control (TAC) Motor harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2111 2008 Ford Fusion indicates Throttle Actuator Control System - Stuck Open.
Common causes: Common causes include Throttle Body Plate Binding, Faulty Throttle Actuator Control (TAC) Motor, Throttle Actuator Control (TAC) Motor harness is open or shorted.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 3,733

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Mar 05, 2019

Description
Possible Causes
How To Fix
Tech Notes ▶
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2111 2008 Ford Fusion Description

The electronic Throttle Actuator Control (TAC) is a DC motor controlled by the Powertrain Control Module (PCM). There are 2 designs for the TAC, parallel and inline. The parallel design has the motor under the bore parallel to the plate shaft. The motor housing is integrated into the main housing. The inline design has a separate motor housing. An internal spring is used in both designs to return the throttle plate to a default position. The default position is typically a throttle angle of 7 to 8 degrees from the hard stop angle. The closed throttle plate hard stop prevents the throttle from binding in the bore. This hard stop setting is not adjustable and is set to result in less airflow than the minimum engine airflow required at idle. The P2111 code is set when the throttle plate is at a greater angle than commanded.

OBDII Code P2111 2008 Ford Fusion - Throttle Actuator Control System - Stuck Open - AutoCodes.com — P2111 2008 Ford Fusion Code - Throttle Actuator Control System - Stuck Open

What does this mean?

What are the Possible Causes of the DTC P2111 2008 Ford Fusion?

Throttle Body Plate Binding
Faulty Throttle Actuator Control (TAC) Motor
Throttle Actuator Control (TAC) Motor harness is open or shorted
Throttle Actuator Control (TAC) Motor circuit poor electrical connection
Faulty Powertrain Control Module (PCM)

How to Fix the DTC P2111 2008 Ford Fusion?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

User Submitted Video

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2111 2008 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2111 2008 Ford Fusion code?

Need more information on how to fix the P2111 2008 Ford Fusion code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2111 2008 Ford Fusion code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2111 2008 Ford Fusion Code

1. What does the OBDII code P2111 mean for a 2008 Ford Fusion?

The P2111 code indicates a problem with the Throttle Actuator Control System being stuck open in a 2008 Ford Fusion.

2. What are the common symptoms of the P2111 code in a 2008 Ford Fusion?

Common symptoms of the P2111 code include reduced engine power, hesitation or stalling, and the vehicle going into limp mode.

3. What are the possible causes of the P2111 code in a 2008 Ford Fusion?

The P2111 code in a 2008 Ford Fusion can be caused by a faulty throttle body, a stuck open throttle plate, wiring issues, or a malfunctioning electronic throttle control system.

4. How can I diagnose the P2111 code in my 2008 Ford Fusion?

Diagnosing the P2111 code involves inspecting the throttle body, checking for any obstructions in the throttle plate, testing the electronic throttle control system, and scanning the vehicle for other related trouble codes.

5. Can I still drive my 2008 Ford Fusion with the P2111 code?

It is not recommended to drive your 2008 Ford Fusion with the P2111 code as it can lead to unsafe driving conditions and potential further damage to the vehicle.

6. What are the repair options for the P2111 code in a 2008 Ford Fusion?

Repair options for the P2111 code may include cleaning or replacing the throttle body, fixing wiring issues, resetting the electronic throttle control system, or replacing the throttle actuator.

7. How much does it cost to fix the P2111 code in a 2008 Ford Fusion?

The cost to fix the P2111 code in a 2008 Ford Fusion can vary depending on the exact cause of the issue and the labor rates in your area. It is recommended to get a diagnostic from a professional technician for an accurate estimate.

8. Can I reset the P2111 code in my 2008 Ford Fusion on my own?

You can attempt to reset the P2111 code in your 2008 Ford Fusion by using an OBDII scanner to clear the code. However, it is important to address the underlying issue causing the code to prevent it from reoccurring.

9. Will the P2111 code in a 2008 Ford Fusion cause permanent damage if left untreated?

Leaving the P2111 code untreated in a 2008 Ford Fusion can potentially cause further damage to the engine or other related components over time. It is best to address the issue promptly to avoid more extensive repairs.

10. How can I prevent the P2111 code from appearing in my 2008 Ford Fusion in the future?

To prevent the P2111 code from appearing in the future, it is recommended to maintain regular servicing of your vehicle, including proper cleaning and maintenance of the throttle body, and addressing any issues promptly as they arise.