AutoCodes – Ford – P2110 2012 Ford Fusion

P2110 2012 Ford Fusion Code - Throttle Actuator Control System - Forced Limited RPM

Quick Answer

The electronic Throttle Actuator Control (TAC) is a DC motor controlled by the Powertrain Control Module (PCM). Common causes include Faulty Throttle Actuator Control (TAC) Motor, Throttle Actuator Control (TAC) Motor harness is open or shorted, Throttle Actuator Control (TAC) Motor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2110 2012 Ford Fusion indicates Throttle Actuator Control System - Forced Limited RPM.
Common causes: Common causes include Faulty Throttle Actuator Control (TAC) Motor, Throttle Actuator Control (TAC) Motor harness is open or shorted, Throttle Actuator Control (TAC) Motor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 2,267

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Mar 05, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2110 2012 Ford Fusion Description

The electronic Throttle Actuator Control (TAC) is a DC motor controlled by the Powertrain Control Module (PCM). There are 2 designs for the TAC, parallel and inline. The parallel design has the motor under the bore parallel to the plate shaft. The motor housing is integrated into the main housing. The inline design has a separate motor housing. An internal spring is used in both designs to return the throttle plate to a default position. The default position is typically a throttle angle of 7 to 8 degrees from the hard stop angle. The closed throttle plate hard stop prevents the throttle from binding in the bore. This hard stop setting is not adjustable and is set to result in less airflow than the minimum engine airflow required at idle. The P2110 code is set when the Throttle Actuator Control (TAC) system is in the Failure Mode Effects Management (FMEM) mode of forced limited RPM.

OBDII Code P2110 2012 Ford Fusion - Throttle Actuator Control System - Forced Limited RPM - AutoCodes.com — P2110 2012 Ford Fusion Code - Throttle Actuator Control System - Forced Limited RPM

What does this mean?

What are the Possible Causes of the DTC P2110 2012 Ford Fusion?

Faulty Throttle Actuator Control (TAC) Motor
Throttle Actuator Control (TAC) Motor harness is open or shorted
Throttle Actuator Control (TAC) Motor circuit poor electrical connection
Faulty Powertrain Control Module (PCM)

How to Fix the DTC P2110 2012 Ford Fusion?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2110 2012 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2110 2012 Ford Fusion code?

Need more information on how to fix the P2110 2012 Ford Fusion code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2110 2012 Ford Fusion code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2110 2012 Ford Fusion Code

1. What are the common symptoms of OBDII code P2110 in a 2012 Ford Fusion?

The common symptoms of code P2110 in a 2012 Ford Fusion include reduced engine power, limited acceleration, and the vehicle going into "limp mode" where it operates at a reduced RPM.

2. What can cause the OBDII code P2110 in a 2012 Ford Fusion?

The most common causes of code P2110 in a 2012 Ford Fusion are a faulty throttle body, wiring issues, or problems with the throttle actuator control system itself.

3. How serious is OBDII code P2110 in a 2012 Ford Fusion?

Code P2110 should be taken seriously as it can affect the performance and drivability of your 2012 Ford Fusion. It is recommended to address the issue promptly to prevent further damage.

4. Can I drive my 2012 Ford Fusion with OBDII code P2110?

It is not recommended to drive your 2012 Ford Fusion with code P2110 as it may lead to further damage to the throttle control system or other engine components. It is best to have the issue diagnosed and repaired as soon as possible.

5. How can I diagnose OBDII code P2110 in my 2012 Ford Fusion?

Diagnosing code P2110 typically involves using an OBDII scanner to read the code and then conducting further testing to determine the exact cause, such as checking the throttle body, related wiring, and connections.

6. Can I repair OBDII code P2110 in my 2012 Ford Fusion myself?

While some DIY enthusiasts may attempt to address code P2110 themselves, it is recommended to have a professional mechanic diagnose and repair the issue to ensure it is fixed correctly and prevent any future complications.

7. What are some potential repair tips for OBDII code P2110 in a 2012 Ford Fusion?

Repair tips for code P2110 may include cleaning the throttle body, checking and repairing any damaged wiring, and ensuring all connections related to the throttle actuator control system are secure.

8. Will resetting the OBDII code P2110 in my 2012 Ford Fusion make it go away permanently?

Simply resetting the code may temporarily clear the warning light, but if the underlying issue causing code P2110 is not addressed, the code is likely to reappear. It is important to diagnose and fix the root cause.

9. How much does it cost to repair OBDII code P2110 in a 2012 Ford Fusion?

The cost of repairing code P2110 in a 2012 Ford Fusion can vary depending on the exact cause of the issue, the labor rates in your area, and whether genuine Ford parts are used. It is recommended to obtain quotes from reputable mechanics.

10. Is there a recall or warranty coverage for OBDII code P2110 in a 2012 Ford Fusion?

Recall or warranty coverage for code P2110 in a 2012 Ford Fusion would depend on any existing recalls or the status of your vehicle's warranty. It is advisable to check with a Ford dealership or authorized service center for more information.