AutoCodes – Ford – P2110 2006 Ford Fusion

P2110 2006 Ford Fusion Code - Throttle Actuator Control System - Forced Limited RPM

Quick Answer

The electronic Throttle Actuator Control (TAC) is a DC motor controlled by the Powertrain Control Module (PCM). Common causes include Faulty Throttle Actuator Control (TAC) Motor, Throttle Actuator Control (TAC) Motor harness is open or shorted, Throttle Actuator Control (TAC) Motor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2110 2006 Ford Fusion indicates Throttle Actuator Control System - Forced Limited RPM.
Common causes: Common causes include Faulty Throttle Actuator Control (TAC) Motor, Throttle Actuator Control (TAC) Motor harness is open or shorted, Throttle Actuator Control (TAC) Motor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 8,446

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Mar 05, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2110 2006 Ford Fusion Description

The electronic Throttle Actuator Control (TAC) is a DC motor controlled by the Powertrain Control Module (PCM). There are 2 designs for the TAC, parallel and inline. The parallel design has the motor under the bore parallel to the plate shaft. The motor housing is integrated into the main housing. The inline design has a separate motor housing. An internal spring is used in both designs to return the throttle plate to a default position. The default position is typically a throttle angle of 7 to 8 degrees from the hard stop angle. The closed throttle plate hard stop prevents the throttle from binding in the bore. This hard stop setting is not adjustable and is set to result in less airflow than the minimum engine airflow required at idle. The P2110 code is set when the Throttle Actuator Control (TAC) system is in the Failure Mode Effects Management (FMEM) mode of forced limited RPM.

OBDII Code P2110 2006 Ford Fusion - Throttle Actuator Control System - Forced Limited RPM - AutoCodes.com — P2110 2006 Ford Fusion Code - Throttle Actuator Control System - Forced Limited RPM

What does this mean?

What are the Possible Causes of the DTC P2110 2006 Ford Fusion?

Faulty Throttle Actuator Control (TAC) Motor
Throttle Actuator Control (TAC) Motor harness is open or shorted
Throttle Actuator Control (TAC) Motor circuit poor electrical connection
Faulty Powertrain Control Module (PCM)

How to Fix the DTC P2110 2006 Ford Fusion?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2110 2006 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2110 2006 Ford Fusion code?

Need more information on how to fix the P2110 2006 Ford Fusion code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2110 2006 Ford Fusion code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2110 2006 Ford Fusion Code

1. What are the common symptoms of OBDII code P2110 in a 2006 Ford Fusion?

- Common symptoms include the vehicle going into "limp mode," where the engine power is limited, acceleration may be sluggish, and the vehicle may have difficulty reaching higher speeds.

2. What can cause the Throttle Actuator Control System to force limited RPM in a 2006 Ford Fusion?

- The most common causes of P2110 in a 2006 Ford Fusion are issues with the throttle actuator control system, such as a faulty throttle body, damaged wiring, or a malfunctioning electronic throttle control unit.

3. How can I diagnose OBDII code P2110 on my 2006 Ford Fusion?

- Diagnosing P2110 typically involves using an OBDII scanner to read the code, checking the throttle body for any visible damage or obstructions, and inspecting the wiring and connectors for any signs of wear or corrosion.

4. Can I still drive my 2006 Ford Fusion with OBDII code P2110 present?

- It is not recommended to drive your vehicle with P2110 present, as it can lead to further damage and safety hazards. It is best to address the issue promptly to avoid potential complications.

5. What are some repair tips for fixing OBDII code P2110 in a 2006 Ford Fusion?

- Repair tips may include cleaning the throttle body, checking and repairing any damaged wiring, replacing the throttle body or electronic throttle control unit if necessary, and ensuring all connections are secure.

6. Is it possible to reset OBDII code P2110 in a 2006 Ford Fusion by disconnecting the battery?

- While disconnecting the battery may temporarily clear the code, it is not a permanent solution. It is important to address the underlying issue causing the code to prevent it from reoccurring.

7. Can a DIY enthusiast fix OBDII code P2110 in a 2006 Ford Fusion, or is it best left to professionals?

- Depending on your level of automotive knowledge and experience, some simple repairs like cleaning the throttle body or checking the wiring may be possible for a DIY enthusiast. However, more complex repairs may require professional assistance.

8. How much does it typically cost to repair OBDII code P2110 in a 2006 Ford Fusion?

- The cost of repairing P2110 can vary depending on the specific cause of the issue, the parts needed for repair, and whether you choose to DIY or seek professional help. Costs may range from a few hundred dollars to over a thousand dollars.

9. Will OBDII code P2110 cause my 2006 Ford Fusion to fail an emissions test?

- Yes, having P2110 present in your vehicle's diagnostic system can cause it to fail an emissions test. It is important to address the issue promptly to ensure your vehicle meets emissions requirements.

10. How can I prevent OBDII code P2110 from occurring in my 2006 Ford Fusion in the future?

- Regular maintenance, such as keeping the throttle body clean, inspecting wiring for damage, and addressing any performance issues promptly, can help prevent the recurrence of OBDII code P2110 in your 2006 Ford Fusion.