P2109 Code - Throttle/Pedal Position Sensor 'A' Minimum Stop Performance
Quick Answer
The Powertrain Control Module (PCM) monitors the electronic throttle for the ability of the throttle plate to reach the lower mechanical stop position within a calibrated amount of time at ignition ON. Common causes include Obstruction in the throttle plate movement, Faulty Electronic Throttle Body (ETB). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2109 indicates Throttle/Pedal Position Sensor 'A' Minimum Stop Performance.
- Common causes
- Common causes include Obstruction in the throttle plate movement, Faulty Electronic Throttle Body (ETB).
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2109 Description
What are the Possible Causes of the DTC P2109?
- Obstruction in the throttle plate movement
- Faulty Electronic Throttle Body (ETB)
How to Fix the DTC P2109?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2109 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2109 code?
Need more information on how to fix the P2109 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2109 code diagnosed by a professional: Find a repair shop in your area
Information for Specific Makes
- P2109 Dodge — Throttle/Pedal Position Sensor 'A' Minimum Stop Performance
- P2109 Ford — Throttle/Pedal Position Sensor 'A' Minimum Stop Performance
- P2109 Lexus — Throttle / Pedal Position Sensor 'A' Minimum Stop Performance
- P2109 Lincoln — Throttle/Pedal Position Sensor 'A' Minimum Stop Performance
- P2109 Mercury — Throttle/Pedal Position Sensor 'A' Minimum Stop Performance
- P2109 Scion — Throttle / Pedal Position Sensor 'A' Minimum Stop Performance
- P2109 Subaru — Throttle/Pedal Position Sensor 'A' Minimum Stop Performance
- P2109 Toyota — Throttle / Pedal Position Sensor 'A' Minimum Stop Performance
Frequently Asked Questions about P2109 Code
1. What are common symptoms of OBDII code P2109 related to the Throttle/Pedal Position Sensor 'A' Minimum Stop Performance?
- Common symptoms include reduced engine power, rough idle, stalling, and difficulty accelerating.
2. What are possible causes of OBDII code P2109?
- Possible causes include a faulty throttle position sensor, issues with the pedal position sensor, wiring issues, or a problem with the electronic throttle control system.
3. How can I diagnose the cause of OBDII code P2109?
- Diagnosis typically involves using a scan tool to retrieve the code, checking the throttle and pedal position sensor readings, inspecting wiring for damage, and testing the electronic throttle control system.
4. Can driving with OBDII code P2109 cause further damage to my vehicle?
- Continuing to drive with this code may lead to poor engine performance, reduced fuel efficiency, and potential damage to other engine components over time.
5. How can I repair OBDII code P2109 related to the Throttle/Pedal Position Sensor 'A' Minimum Stop Performance?
- Repair may involve replacing the faulty throttle or pedal position sensor, repairing damaged wiring, or addressing issues with the electronic throttle control system.
6. Is it safe to continue driving my vehicle with OBDII code P2109?
- It is not recommended to drive with this code as it can affect the performance and safety of your vehicle. It is best to address the issue promptly.
7. Can I reset OBDII code P2109 without fixing the underlying issue?
- While you can clear the code using a scan tool, it will likely reappear if the root cause is not resolved. It is important to address the underlying issue to prevent further problems.
8. How much does it typically cost to repair OBDII code P2109?
- The cost of repair can vary depending on the specific cause of the code, but it may involve parts and labor ranging from $100 to $500 or more.
9. Are there any preventive measures to avoid OBDII code P2109 in the future?
- Regular maintenance, such as checking and cleaning throttle components, inspecting wiring for damage, and addressing any sensor issues promptly, can help prevent this code from occurring.
10. Can a DIY enthusiast fix OBDII code P2109, or is professional help recommended?
- Depending on your skill level and access to tools, DIY repair may be possible for some causes of this code. However, professional help is recommended for complex issues or if you are unsure about the diagnosis and repair process.
Discuss the causes and fixes for P2109 OBDII Code
Code P2109 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
