P2108 Jeep Code - Throttle Actuator Control Module Performance
Quick Answer
The throttle is moved by a bidirectional DC motor that responds to commands from Powertrain Control Module (PCM) based on inputs from Accelerator Pedal Position Sensor (APPS). Common causes include Faulty Electronic Throttle Control (ETC) Module, Electronic Throttle Control Module harness is open or shorted, Electronic Throttle Control Module circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2108 Jeep indicates Throttle Actuator Control Module Performance.
- Common causes
- Common causes include Faulty Electronic Throttle Control (ETC) Module, Electronic Throttle Control Module harness is open or shorted, Electronic Throttle Control Module circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2108 Jeep Description
What are the Possible Causes of the DTC P2108 Jeep?
- Faulty Electronic Throttle Control (ETC) Module
- Electronic Throttle Control Module harness is open or shorted
- Electronic Throttle Control Module circuit poor electrical connection
- Faulty Powertrain Control Module (PCM)
How to Fix the DTC P2108 Jeep?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2108 Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2108 Jeep code?
Need more information on how to fix the P2108 Jeep code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2108 Jeep code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2108 Jeep Code
What does OBDII code P2108 mean for a Jeep?
P2108 indicates a problem with the Throttle Actuator Control Module Performance, meaning the electronic control system for the throttle is not working as expected.
What are common symptoms of code P2108 in a Jeep?
Symptoms may include reduced engine power, poor acceleration, erratic idle, the throttle not responding properly, and the check engine light illuminated.
What causes code P2108 on a Jeep?
Common causes include a malfunctioning throttle actuator control module, wiring issues, a faulty throttle body, or a problem with the engine control module (ECM).
Can I drive my Jeep with code P2108?
Driving with this code can be risky as it may lead to reduced engine performance or throttle failure. It's best to address the issue promptly.
How do I diagnose code P2108 in my Jeep?
Start by checking the wiring and connectors for damage or corrosion, inspect the throttle body, and test the throttle actuator control module using a diagnostic scanner.
Is code P2108 specific to Jeeps?
No, P2108 is a generic OBDII code and can appear in various makes and models, though the specific causes and symptoms might vary slightly.
How can I fix code P2108 on my Jeep?
Repairs may involve cleaning or replacing the throttle body, fixing damaged wiring, replacing the throttle actuator control module, or reprogramming the ECM.
How much does it cost to repair code P2108 on a Jeep?
Repair costs vary, but cleaning the throttle body may cost around $100-$200, while replacing the throttle actuator control module could cost $300-$600, depending on labor and parts.
Can a dirty throttle body trigger code P2108?
Yes, a dirty throttle body can cause the throttle actuator system to perform poorly, potentially triggering this code.
Will clearing the code fix P2108 on my Jeep?
Clearing the code may temporarily turn off the check engine light, but the underlying issue must be resolved to prevent the code from returning.
Discuss the causes and fixes for P2108 Jeep OBDII Code
Code P2108 Jeep comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
