AutoCodes – Ford – P2107 2012 Ford Fusion

P2107 2012 Ford Fusion Code - Throttle Actuator Control Module Processor

Quick Answer

The electronic Throttle Actuator Control (TAC) is a DC motor controlled by the Powertrain Control Module (PCM). Common causes include Faulty Electronic Throttle Body (ETB), Electronic Throttle Body (ETB) harness is open or shorted, Electronic Throttle Body (ETB) circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2107 2012 Ford Fusion indicates Throttle Actuator Control Module Processor.
Common causes: Common causes include Faulty Electronic Throttle Body (ETB), Electronic Throttle Body (ETB) harness is open or shorted, Electronic Throttle Body (ETB) circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 4,779

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 14, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2107 2012 Ford Fusion Description

The electronic Throttle Actuator Control (TAC) is a DC motor controlled by the Powertrain Control Module (PCM). There are 2 designs for the TAC, parallel and inline. The parallel design has the motor under the bore parallel to the plate shaft. The motor housing is integrated into the main housing. The inline design has a separate motor housing. An internal spring is used in both designs to return the throttle plate to a default position. The default position is typically a throttle angle of 7 to 8 degrees from the hard stop angle. The closed throttle plate hard stop prevents the throttle from binding in the bore. This hard stop setting is not adjustable and is set to result in less airflow than the minimum engine airflow required at idle. The P2107 code is set when the Electronic Throttle Control (ETC) control area of the Powertrain Control Module (PCM) failed test. Fault code could the result of incorrect Throttle Position (TP) command of the Throttle Actuator Control Module (TACM).

OBDII Code P2107 2012 Ford Fusion - Throttle Actuator Control Module Processor - AutoCodes.com — P2107 2012 Ford Fusion Code - Throttle Actuator Control Module Processor

What does this mean?

What are the Possible Causes of the DTC P2107 2012 Ford Fusion?

Faulty Electronic Throttle Body (ETB)
Electronic Throttle Body (ETB) harness is open or shorted
Electronic Throttle Body (ETB) circuit poor electrical connection
Faulty Powertrain Control Module (PCM)

How to Fix the DTC P2107 2012 Ford Fusion?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2107 2012 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2107 2012 Ford Fusion code?

Need more information on how to fix the P2107 2012 Ford Fusion code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2107 2012 Ford Fusion code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2107 2012 Ford Fusion Code

1. What does OBDII code P2107 on a 2012 Ford Fusion indicate?

The P2107 code indicates a problem with the Throttle Actuator Control Module Processor in the vehicle's electronic throttle control system.

2. What are some common symptoms of OBDII code P2107 in a 2012 Ford Fusion?

Common symptoms of code P2107 may include engine stalling, lack of acceleration, rough idling, and the vehicle going into "limp mode."

3. What are the possible causes of OBDII code P2107 on a 2012 Ford Fusion?

Possible causes of code P2107 include a faulty throttle body, a malfunctioning electronic throttle control module, wiring issues, or a problem with the throttle position sensor.

4. How can I diagnose the OBDII code P2107 on my 2012 Ford Fusion?

Diagnosing code P2107 typically involves using a scan tool to check for the specific trouble code, inspecting the throttle body and its connections, and testing the throttle position sensor.

5. Can I still drive my 2012 Ford Fusion with OBDII code P2107?

It is not recommended to drive your vehicle with code P2107 as it can lead to unsafe driving conditions and potential further damage to the engine.

6. Is it safe to reset the OBDII code P2107 in my 2012 Ford Fusion?

While resetting the code may temporarily turn off the check engine light, it is important to address the underlying issue causing the code to prevent further problems.

7. How much does it typically cost to repair OBDII code P2107 on a 2012 Ford Fusion?

The cost of repairing code P2107 can vary depending on the specific cause, but it may range from $200 to $600 or more, including parts and labor.

8. Can I fix OBDII code P2107 in my 2012 Ford Fusion myself?

While some DIY enthusiasts may attempt to address code P2107 themselves, it is recommended to consult a professional mechanic for an accurate diagnosis and proper repair.

9. What are some preventive maintenance tips to avoid OBDII code P2107 in a 2012 Ford Fusion?

To prevent code P2107, it's important to regularly inspect and clean the throttle body, maintain proper engine performance, and address any issues with the throttle control system promptly.

10. Will OBDII code P2107 cause my 2012 Ford Fusion to fail an emissions test?

Yes, code P2107 can potentially cause your vehicle to fail an emissions test as it indicates a problem with the throttle control module affecting engine performance.