AutoCodes – Ford – P2107 2010 Ford Fusion

P2107 2010 Ford Fusion Code - Throttle Actuator Control Module Processor

Quick Answer

The electronic Throttle Actuator Control (TAC) is a DC motor controlled by the Powertrain Control Module (PCM). Common causes include Faulty Electronic Throttle Body (ETB), Electronic Throttle Body (ETB) harness is open or shorted, Electronic Throttle Body (ETB) circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2107 2010 Ford Fusion indicates Throttle Actuator Control Module Processor.
Common causes: Common causes include Faulty Electronic Throttle Body (ETB), Electronic Throttle Body (ETB) harness is open or shorted, Electronic Throttle Body (ETB) circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 7,454

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 14, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2107 2010 Ford Fusion Description

The electronic Throttle Actuator Control (TAC) is a DC motor controlled by the Powertrain Control Module (PCM). There are 2 designs for the TAC, parallel and inline. The parallel design has the motor under the bore parallel to the plate shaft. The motor housing is integrated into the main housing. The inline design has a separate motor housing. An internal spring is used in both designs to return the throttle plate to a default position. The default position is typically a throttle angle of 7 to 8 degrees from the hard stop angle. The closed throttle plate hard stop prevents the throttle from binding in the bore. This hard stop setting is not adjustable and is set to result in less airflow than the minimum engine airflow required at idle. The P2107 code is set when the Electronic Throttle Control (ETC) control area of the Powertrain Control Module (PCM) failed test. Fault code could the result of incorrect Throttle Position (TP) command of the Throttle Actuator Control Module (TACM).

OBDII Code P2107 2010 Ford Fusion - Throttle Actuator Control Module Processor - AutoCodes.com — P2107 2010 Ford Fusion Code - Throttle Actuator Control Module Processor

What does this mean?

What are the Possible Causes of the DTC P2107 2010 Ford Fusion?

Faulty Electronic Throttle Body (ETB)
Electronic Throttle Body (ETB) harness is open or shorted
Electronic Throttle Body (ETB) circuit poor electrical connection
Faulty Powertrain Control Module (PCM)

How to Fix the DTC P2107 2010 Ford Fusion?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2107 2010 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2107 2010 Ford Fusion code?

Need more information on how to fix the P2107 2010 Ford Fusion code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2107 2010 Ford Fusion code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2107 2010 Ford Fusion Code

What does the OBDII code P2107 mean for a 2010 Ford Fusion?

P2107 indicates a problem with the Throttle Actuator Control Module Processor, which can affect the vehicle's throttle response.

What symptoms might I experience if my Ford Fusion has a P2107 code?

Common symptoms include reduced engine power, unresponsive acceleration, and the check engine light being illuminated.

What could cause the P2107 code to trigger in my Ford Fusion?

Possible causes include a faulty throttle actuator control module, wiring issues, poor connections, or a malfunctioning accelerator pedal position sensor.

Can I continue to drive my Ford Fusion if the P2107 code is present?

It is not recommended to drive the vehicle as it may enter limp mode, limiting power and posing safety risks.

How can I diagnose the P2107 code accurately?

Use an OBDII scanner to read the code and check for any related codes. Inspect wiring and connectors for damage, and test the throttle actuator module.

What are some common repairs for a P2107 code?

Repairs may include replacing the throttle actuator control module, fixing wiring issues, or replacing the accelerator pedal position sensor.

Is it necessary to reset the check engine light after fixing the P2107 code?

Yes, after addressing the underlying issue, you should clear the code using an OBDII scanner to reset the check engine light.

How much does it typically cost to fix a P2107 code?

Repair costs can vary widely, typically ranging from $100 to $500, depending on the specific issue and parts needed.

Can I fix the P2107 code myself?

If you have automotive knowledge and tools, you may be able to diagnose and repair it yourself, especially if it involves wiring or connections. However, if youâ€™re unsure, consulting a professional is advised.