AutoCodes – Ford – P2107 1997 Ford F150

P2107 1997 Ford F150 Code - Throttle Actuator Control Module Processor

Quick Answer

The electronic Throttle Actuator Control (TAC) is a DC motor controlled by the Powertrain Control Module (PCM). Common causes include Faulty Electronic Throttle Body (ETB), Electronic Throttle Body (ETB) harness is open or shorted, Electronic Throttle Body (ETB) circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2107 1997 Ford F150 indicates Throttle Actuator Control Module Processor.
Common causes: Common causes include Faulty Electronic Throttle Body (ETB), Electronic Throttle Body (ETB) harness is open or shorted, Electronic Throttle Body (ETB) circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 2,636

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 14, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2107 1997 Ford F150 Description

The electronic Throttle Actuator Control (TAC) is a DC motor controlled by the Powertrain Control Module (PCM). There are 2 designs for the TAC, parallel and inline. The parallel design has the motor under the bore parallel to the plate shaft. The motor housing is integrated into the main housing. The inline design has a separate motor housing. An internal spring is used in both designs to return the throttle plate to a default position. The default position is typically a throttle angle of 7 to 8 degrees from the hard stop angle. The closed throttle plate hard stop prevents the throttle from binding in the bore. This hard stop setting is not adjustable and is set to result in less airflow than the minimum engine airflow required at idle. The P2107 code is set when the Electronic Throttle Control (ETC) control area of the Powertrain Control Module (PCM) failed test. Fault code could the result of incorrect Throttle Position (TP) command of the Throttle Actuator Control Module (TACM).

OBDII Code P2107 1997 Ford F150 - Throttle Actuator Control Module Processor - AutoCodes.com — P2107 1997 Ford F150 Code - Throttle Actuator Control Module Processor

What does this mean?

What are the Possible Causes of the DTC P2107 1997 Ford F150?

Faulty Electronic Throttle Body (ETB)
Electronic Throttle Body (ETB) harness is open or shorted
Electronic Throttle Body (ETB) circuit poor electrical connection
Faulty Powertrain Control Module (PCM)

How to Fix the DTC P2107 1997 Ford F150?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2107 1997 Ford F150 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2107 1997 Ford F150 code?

Need more information on how to fix the P2107 1997 Ford F150 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2107 1997 Ford F150 code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2107 1997 Ford F150 Code

1. What does OBDII code P2107 on a 1997 Ford F150 indicate?

The code P2107 indicates a problem with the Throttle Actuator Control Module Processor in the vehicle.

2. What are some common symptoms of OBDII code P2107 in a 1997 Ford F150?

Common symptoms of code P2107 include reduced engine power, rough idling, stalling, and the vehicle going into "limp mode."

3. What are some possible causes of OBDII code P2107 in a 1997 Ford F150?

Possible causes of code P2107 include a faulty throttle actuator control module, wiring issues, or a problem with the throttle position sensor.

4. How can I diagnose the issue related to OBDII code P2107 in my 1997 Ford F150?

Diagnosing the issue involves checking the throttle actuator control module for proper function, inspecting the wiring for any damage, and testing the throttle position sensor.

5. Can I continue to drive my 1997 Ford F150 with OBDII code P2107?

It is not recommended to continue driving with code P2107 present, as it can lead to further damage and safety hazards. It's best to address the issue promptly.

6. How can I repair OBDII code P2107 in my 1997 Ford F150?

Repairing code P2107 may involve replacing the throttle actuator control module, repairing any damaged wiring, or recalibrating the throttle position sensor.

7. Will resetting the OBDII system clear code P2107 on my 1997 Ford F150?

Resetting the OBDII system may temporarily clear the code, but if the underlying issue is not addressed, the code is likely to reappear.

8. How much does it typically cost to repair OBDII code P2107 in a 1997 Ford F150?

The cost of repairing code P2107 can vary depending on the exact cause of the issue, but it may range from a few hundred to over a thousand dollars including parts and labor.

9. Can a DIY enthusiast fix OBDII code P2107 in a 1997 Ford F150?

While some individuals with automotive repair experience may be able to diagnose and repair code P2107 themselves, it is recommended to consult with a professional mechanic for accurate diagnosis and proper repair.

10. Is OBDII code P2107 a common issue in 1997 Ford F150 vehicles?

While not extremely common, code P2107 can occur in 1997 Ford F150 vehicles due to various factors, such as age, wear and tear, or electrical issues.