AutoCodes – Ford – P2105 2010 Ford Fusion

P2105 2010 Ford Fusion Code - Throttle Actuator Control System - Forced Engine Shutdown

Quick Answer

The electronic Throttle Actuator Control (TAC) is a DC motor controlled by the Powertrain Control Module (PCM). Common causes include Faulty Throttle Actuator Control (TAC), Throttle Actuator Control (TAC) harness is open or shorted, Throttle Actuator Control (TAC) circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2105 2010 Ford Fusion indicates Throttle Actuator Control System - Forced Engine Shutdown.
Common causes: Common causes include Faulty Throttle Actuator Control (TAC), Throttle Actuator Control (TAC) harness is open or shorted, Throttle Actuator Control (TAC) circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 2,471

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 14, 2020

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2105 2010 Ford Fusion Description

The electronic Throttle Actuator Control (TAC) is a DC motor controlled by the Powertrain Control Module (PCM). There are 2 designs for the TAC, parallel and inline. The parallel design has the motor under the bore parallel to the plate shaft. The motor housing is integrated into the main housing. The inline design has a separate motor housing. An internal spring is used in both designs to return the throttle plate to a default position. The default position is typically a throttle angle of 7 to 8 degrees from the hard stop angle. The closed throttle plate hard stop prevents the throttle from binding in the bore. This hard stop setting is not adjustable and is set to result in less airflow than the minimum engine airflow required at idle. The P2105 code is set when the Throttle Actuator Control (TAC) system is in the Failure Mode Effects Management (FMEM) mode of forced engine shutdown.

OBDII Code P2105 2010 Ford Fusion - Throttle Actuator Control System - Forced Engine Shutdown - AutoCodes.com — P2105 2010 Ford Fusion Code - Throttle Actuator Control System - Forced Engine Shutdown

What does this mean?

What are the Possible Causes of the DTC P2105 2010 Ford Fusion?

Faulty Throttle Actuator Control (TAC)
Throttle Actuator Control (TAC) harness is open or shorted
Throttle Actuator Control (TAC) circuit poor electrical connection

How to Fix the DTC P2105 2010 Ford Fusion?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

The P2105 code is an informational code and may be set in combination with a number of other codes which are causing the FMEM. Diagnose other codes first.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2105 2010 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2105 2010 Ford Fusion code?

Need more information on how to fix the P2105 2010 Ford Fusion code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2105 2010 Ford Fusion code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2105 2010 Ford Fusion Code

1. What does OBDII code P2105 mean on a 2010 Ford Fusion?

- OBDII code P2105 indicates a Throttle Actuator Control System - Forced Engine Shutdown error on a 2010 Ford Fusion.

2. What are the common symptoms of OBDII code P2105 on a 2010 Ford Fusion?

- Common symptoms of P2105 include the vehicle going into "limp mode," reduced engine power, and the engine stalling unexpectedly.

3. What are the possible causes of OBDII code P2105 on a 2010 Ford Fusion?

- The potential causes of P2105 can include a faulty throttle actuator control module, damaged wiring or connectors, or issues with the throttle body itself.

4. How serious is OBDII code P2105 on a 2010 Ford Fusion?

- OBDII code P2105 should be taken seriously as it can result in unexpected engine shutdowns or loss of power, which can pose a safety risk while driving.

5. Can I continue driving my 2010 Ford Fusion with OBDII code P2105 present?

- It is not recommended to continue driving your vehicle with P2105 as it can lead to further damage and safety hazards. It is best to address the issue promptly.

6. How can I diagnose OBDII code P2105 on my 2010 Ford Fusion?

- Diagnosing P2105 typically involves using an OBDII scanner to retrieve the code, inspecting the throttle actuator components, and testing the wiring for any faults.

7. What are some repair tips for fixing OBDII code P2105 on a 2010 Ford Fusion?

- Repair tips for P2105 may include checking and repairing any damaged wiring, replacing the throttle actuator control module, or cleaning the throttle body.

8. Can I reset OBDII code P2105 on my 2010 Ford Fusion by disconnecting the battery?

- While disconnecting the battery may temporarily clear the code, it is important to address the underlying issue causing P2105 to prevent it from reoccurring.

9. How much does it typically cost to repair OBDII code P2105 on a 2010 Ford Fusion?

- The cost to repair P2105 can vary depending on the exact cause of the issue, but it may range from a few hundred to over a thousand dollars, including parts and labor.

10. Is it possible to prevent OBDII code P2105 from occurring on my 2010 Ford Fusion?

- Regular maintenance, such as cleaning the throttle body, checking and replacing worn-out components, and addressing any warning signs promptly, can help prevent OBDII code P2105 from occurring.