P2104 2006 Ford Fusion Code - Throttle Actuator Control System Forced Idle
Quick Answer
The electronic Throttle Actuator Control (TAC) is a DC motor controlled by the Powertrain Control Module (PCM). Common causes include Faulty Throttle Actuator Control (TAC), Throttle Actuator Control (TAC) harness is open or shorted, Throttle Actuator Control (TAC) circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2104 2006 Ford Fusion indicates Throttle Actuator Control System Forced Idle.
- Common causes
- Common causes include Faulty Throttle Actuator Control (TAC), Throttle Actuator Control (TAC) harness is open or shorted, Throttle Actuator Control (TAC) circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2104 2006 Ford Fusion Description
What are the Possible Causes of the DTC P2104 2006 Ford Fusion?
- Faulty Throttle Actuator Control (TAC)
- Throttle Actuator Control (TAC) harness is open or shorted
- Throttle Actuator Control (TAC) circuit poor electrical connection
- Faulty Powertrain Control Module (PCM)
How to Fix the DTC P2104 2006 Ford Fusion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2104 2006 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2104 2006 Ford Fusion code?
Need more information on how to fix the P2104 2006 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2104 2006 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2104 2006 Ford Fusion Code
1. What does the OBDII code P2104 mean on a 2006 Ford Fusion?
P2104 indicates that the Throttle Actuator Control (TAC) system has entered a "forced idle" mode due to a detected fault.
2. What are the common symptoms of the P2104 code in a 2006 Ford Fusion?
Symptoms include reduced engine power, inability to accelerate, a check engine light, and the engine being stuck at idle speed.
3. What causes the P2104 code to appear on a 2006 Ford Fusion?
Common causes include a malfunctioning throttle body, damaged wiring or connectors, a failed accelerator pedal position sensor, or a problem with the powertrain control module (PCM).
4. Can I drive my 2006 Ford Fusion with the P2104 code?
It is not recommended to drive with this code active, as the vehicle may have limited power and could become unsafe to operate.
5. How do I diagnose the P2104 code on a 2006 Ford Fusion?
Begin by inspecting the throttle body, wiring, and connectors for damage. Then use a scan tool to monitor throttle position sensor and accelerator pedal position sensor data.
6. How can I fix the P2104 code on my 2006 Ford Fusion?
Repairs may include cleaning or replacing the throttle body, repairing damaged wiring or connectors, or replacing faulty sensors.
7. Could a dirty throttle body cause the P2104 code?
Yes, a dirty or clogged throttle body can restrict airflow and trigger the P2104 code.
8. Do I need to replace the PCM if I have the P2104 code?
Replacing the PCM is a last resort after verifying that all other components, such as the throttle body and sensors, are functioning properly.
9. What tools are needed to diagnose the P2104 code on a 2006 Ford Fusion?
You’ll need an OBDII scanner, a multimeter, and possibly a throttle body cleaner for inspection and repairs.
10. How much does it cost to fix the P2104 code on a 2006 Ford Fusion?
The cost varies depending on the root cause but can range from $100 for cleaning the throttle body to $800+ for a throttle body or PCM replacement.
Discuss the causes and fixes for P2104 2006 Ford Fusion OBDII Code
Code P2104 2006 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
