P2103 Buick Code - Throttle Actuator Control Motor Control Circuit High Voltage
Quick Answer
The Engine Control Module (ECM) is the control center for the throttle body Throttle Actuator Control (TAC) system. Common causes include Faulty Throttle Body Assembly, Throttle Body Assembly harness is open or shorted, Throttle Body Assembly circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2103 Buick indicates Throttle Actuator Control Motor Control Circuit High Voltage.
- Common causes
- Common causes include Faulty Throttle Body Assembly, Throttle Body Assembly harness is open or shorted, Throttle Body Assembly circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2103 Buick Description
Two processors are also used to monitor the throttle body (TAC) motor system data. Both processors are located within the ECM. Both processors monitor each other's data to verify that the indicated throttle position is correct.
The Diagnostic Trouble Code (DTC) will set when the ECM detects a throttle actuator circuit that is shorted. The condition exists for 1 s.
What are the Possible Causes of the DTC P2103 Buick?
- Faulty Throttle Body Assembly
- Throttle Body Assembly harness is open or shorted
- Throttle Body Assembly circuit poor electrical connection
How to Fix the DTC P2103 Buick?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2103 Buick code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2103 Buick code?
Need more information on how to fix the P2103 Buick code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2103 Buick code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2103 Buick Code
What does the OBDII code P2103 mean for a Buick?
P2103 indicates a problem with the throttle actuator control motor control circuit, specifically a high voltage condition detected by the engine control module (ECM).
What are the common symptoms of code P2103 in a Buick?
Symptoms may include poor acceleration, limited throttle response, the engine entering limp mode, and the check engine light turning on.
What causes the P2103 code to appear in a Buick?
Common causes include a faulty throttle actuator motor, damaged wiring or connectors in the throttle control circuit, or an issue with the ECM itself.
Can I drive my Buick with the P2103 code?
Driving with this code is not recommended, as it can limit engine performance and potentially lead to unsafe driving conditions.
How do I diagnose the P2103 code on my Buick?
Start by inspecting the throttle actuator wiring and connectors for damage. Use a multimeter to check for proper voltage and continuity in the circuit.
What repairs are typically needed to fix code P2103 on a Buick?
Repairs may include replacing the throttle actuator motor, repairing damaged wiring or connectors, or, in rare cases, reprogramming or replacing the ECM.
Is the P2103 code related to the throttle body?
Yes, it directly relates to the throttle actuator motor, which is located within the throttle body and controls the throttle plate's movement.
Can a dirty throttle body cause the P2103 code?
While unlikely, a dirty throttle body can cause throttle actuator issues. Cleaning the throttle body may help if buildup is affecting its operation.
How much does it cost to fix the P2103 code on a Buick?
Repair costs vary but typically range from $150 to $500, depending on whether the throttle actuator or wiring needs repair or replacement.
What tools are needed to troubleshoot the P2103 code?
You’ll need an OBDII scanner, a multimeter, and possibly a wiring diagram for your Buick to diagnose the issue effectively.
Discuss the causes and fixes for P2103 Buick OBDII Code
Code P2103 Buick comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
