P2102 2013 Toyota RAV4 Code - Throttle Actuator Control Motor Circuit Low
Quick Answer
The Throttle Actuator is operated by the Engine Control Module (ECM) and opens and closes the throttle valve using gears. Common causes include Dirty throttle body, Faulty Throttle Actuator, Throttle Actuator harness is open. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2102 2013 Toyota RAV4 indicates Throttle Actuator Control Motor Circuit Low.
- Common causes
- Common causes include Dirty throttle body, Faulty Throttle Actuator, Throttle Actuator harness is open.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2102 2013 Toyota RAV4 Description
The opening angle of the throttle valve is detected by the throttle position sensor, which is mounted on the throttle with motor body assembly. The throttle position sensor provides feedback to the ECM. This feedback allows the ECM to appropriately control the throttle actuator and monitor the throttle opening angle as the ECM responds to driver inputs.
The ECM monitors the electrical current through the electronic actuator and detects malfunctions and open circuits in the throttle actuator based on this value. If the current is outside the standard range, the ECM determines that there is a malfunction in the throttle actuator. In addition, if the throttle valve does not function properly (for example, stuck on), the ECM determines that there is a malfunction. The ECM then illuminates the MIL and stores a Diagnostic Trouble Code (DTC).
What are the Possible Causes of the DTC P2102 2013 Toyota RAV4?
- Dirty throttle body
- Faulty Throttle Actuator
- Throttle Actuator harness is open
- Throttle Actuator circuit poor electrical connection
- Faulty Throttle with Motor Body Assembly
- Faulty Engine Control Module (ECM)
How to Fix the DTC P2102 2013 Toyota RAV4?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2102 2013 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2102 2013 Toyota RAV4 code?
Need more information on how to fix the P2102 2013 Toyota RAV4 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2102 2013 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2102 2013 Toyota RAV4 Code
1. What are the common symptoms of OBDII code P2102 in a 2013 Toyota RAV4?
- Common symptoms include reduced engine power, engine stalling, and the vehicle going into "limp mode" where it operates at reduced performance.
2. What can cause the Throttle Actuator Control Motor Circuit Low error code (P2102) in a 2013 Toyota RAV4?
- The code P2102 in a 2013 Toyota RAV4 is typically caused by a faulty throttle actuator control motor, damaged wiring, or a poor connection in the circuit.
3. How can I diagnose the Throttle Actuator Control Motor Circuit Low issue in my 2013 Toyota RAV4?
- Diagnosing the P2102 code involves checking the throttle actuator motor, inspecting the wiring for any damage, and testing the connections for proper voltage.
4. Can a dirty throttle body cause the P2102 error code in a 2013 Toyota RAV4?
- Yes, a dirty throttle body can lead to the P2102 code as it can cause the throttle actuator control motor to malfunction due to restricted airflow.
5. What are some repair tips for fixing the Throttle Actuator Control Motor Circuit Low error in a 2013 Toyota RAV4?
- Repair tips include cleaning the throttle body, checking and repairing any damaged wiring, ensuring proper connections, and replacing the throttle actuator control motor if necessary.
6. Is it safe to continue driving my 2013 Toyota RAV4 with the P2102 error code?
- It is not recommended to drive the vehicle with the P2102 code as it can lead to unsafe driving conditions and potential engine damage. It's best to address the issue promptly.
7. Can resetting the OBDII system clear the P2102 error code in a 2013 Toyota RAV4?
- Resetting the OBDII system may temporarily clear the code, but if the underlying issue causing the P2102 code is not fixed, the code is likely to reappear.
8. How much does it typically cost to repair the Throttle Actuator Control Motor Circuit Low issue in a 2013 Toyota RAV4?
- Repair costs for the P2102 code can vary depending on the exact cause of the issue, but they may range from a few hundred to over a thousand dollars, including parts and labor.
9. Can I fix the Throttle Actuator Control Motor Circuit Low error in my 2013 Toyota RAV4 by myself?
- While some DIY enthusiasts may be able to address simple causes like dirty throttle bodies or loose connections, diagnosing and repairing the P2102 code usually requires professional expertise.
10. How long does it typically take to repair the P2102 error code in a 2013 Toyota RAV4?
- The repair time for the P2102 code can vary based on the exact cause and complexity of the repair. It may take a few hours to a full day to complete the necessary diagnostics and fixes.
Discuss the causes and fixes for P2102 2013 Toyota RAV4 OBDII Code
Code P2102 2013 Toyota RAV4 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
