AutoCodes – GMC – P2101 2014 GMC Sierra

P2101 2014 GMC Sierra Code - Throttle Actuator Position Performance

Quick Answer

The Engine Control Module (ECM) determines the driver's intent based on input from the accelerator pedal position sensors, then calculates the appropriate throttle response based on the throttle position sensors. Common causes include Binding or bent Throttle Plate, Faulty Throttle Body Assembly, Throttle Body Assembly harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2101 2014 GMC Sierra indicates Throttle Actuator Position Performance .
Common causes: Common causes include Binding or bent Throttle Plate, Faulty Throttle Body Assembly, Throttle Body Assembly harness is open or shorted.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs Step-by-Step Diagnostic Guide My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 285

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Aug 13, 2022

Description
Step-by-Step Diagnostic Guide
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2101 2014 GMC Sierra Description

The Engine Control Module (ECM) determines the driver's intent based on input from the accelerator pedal position sensors, then calculates the appropriate throttle response based on the throttle position sensors. The ECM controls the throttle valve by applying a varying voltage to the control circuits of the Throttle Actuator Control (TAC) motor. The ECM monitors the duty cycle that is required to actuate the throttle valve. The ECM monitors the TP sensor signal/serial data circuit to determine the actual throttle valve position. The TP sensor information is transmitted between the throttle body and the ECM on the signal/serial data circuit. The Diagnostic Trouble Code (DTC) will be set when the ECM detects the actual throttle position does not match the predicted throttle position for greater than 1 s.

OBDII Code P2101 2014 GMC Sierra - Throttle Actuator Position Performance - AutoCodes.com — P2101 2014 GMC Sierra Code - Throttle Actuator Position Performance

What does this mean?

What are the Possible Causes of the DTC P2101 2014 GMC Sierra?

Binding or bent Throttle Plate
Faulty Throttle Body Assembly
Throttle Body Assembly harness is open or shorted
Throttle Body Assembly circuit poor electrical connection
Faulty Engine Control Module (ECM)

How to Fix the DTC P2101 2014 GMC Sierra?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2101 2014 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2101 2014 GMC Sierra code?

Need more information on how to fix the P2101 2014 GMC Sierra code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2101 2014 GMC Sierra code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2101 2014 GMC Sierra Code

1. What are the common symptoms of OBDII code P2101 in a 2014 GMC Sierra?

- Common symptoms include reduced engine power, illuminated Check Engine Light, and difficulty accelerating.

2. What does the OBDII code P2101 for Throttle Actuator Position Performance mean in a 2014 GMC Sierra?

- This code indicates that there is a malfunction in the throttle actuator control system.

3. What are the possible causes of OBDII code P2101 in a 2014 GMC Sierra?

- Possible causes include a faulty throttle actuator, damaged wiring or connectors, or a malfunctioning throttle position sensor.

4. How can I diagnose OBDII code P2101 in my 2014 GMC Sierra?

- Diagnosing this code typically involves using a scan tool to check for other related codes, testing the throttle actuator and sensor, and inspecting the wiring for any damage.

5. Can I still drive my 2014 GMC Sierra with OBDII code P2101?

- It is not recommended to drive the vehicle with this code as it may lead to further damage or safety issues. It's best to have the issue diagnosed and repaired promptly.

6. How can I repair OBDII code P2101 in my 2014 GMC Sierra?

- Repair options may include replacing the throttle actuator, repairing damaged wiring or connectors, or recalibrating the throttle position sensor.

7. Is it safe to reset the Check Engine Light after fixing OBDII code P2101 in my 2014 GMC Sierra?

- Yes, once the issue has been repaired, it is safe to reset the Check Engine Light using a scan tool to clear the stored trouble codes.

8. What are some preventive maintenance tips to avoid OBDII code P2101 in a 2014 GMC Sierra?

- Regularly inspecting the throttle system, keeping up with scheduled maintenance, and addressing any engine performance issues promptly can help prevent this code.

9. How long does it typically take to repair OBDII code P2101 in a 2014 GMC Sierra?

- The repair time can vary depending on the exact cause of the issue, but it may take anywhere from a few hours to a day to diagnose and repair the problem.

10. Can I fix OBDII code P2101 in my 2014 GMC Sierra myself, or should I take it to a professional mechanic?

- While some DIY enthusiasts may be able to tackle this repair, it is recommended to seek the expertise of a professional mechanic due to the complexity of the throttle actuator control system.