AutoCodes – Nissan – P2101 2008 Nissan Rogue

P2101 2008 Nissan Rogue Code - Electric Throttle Control Performance

Quick Answer

The throttle actuator is operated by the Engine Control Module (ECM) and it opens and closes the throttle valve. Common causes include Faulty Electric Throttle Control (ETC) Actuator, Electric Throttle Control (ETC) Actuator harness is open or shorted, Electric Throttle Control (ETC) Actuator circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2101 2008 Nissan Rogue indicates Electric Throttle Control Performance.
Common causes: Common causes include Faulty Electric Throttle Control (ETC) Actuator, Electric Throttle Control (ETC) Actuator harness is open or shorted, Electric Throttle Control (ETC) Actuator circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs Step-by-Step Diagnostic Guide My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 4,973

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Feb 28, 2019

Description
Step-by-Step Diagnostic Guide
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2101 2008 Nissan Rogue Description

The throttle actuator is operated by the Engine Control Module (ECM) and it opens and closes the throttle valve. Power supply for the throttle control motor is provided to the ECM via throttle control motor relay. The throttle control motor relay is ON/OFF controlled by the ECM. When the ignition switch is turned ON, the ECM sends an ON signal to throttle control motor relay and battery voltage is provided to the ECM. When the ignition switch is turned OFF, the ECM sends an OFF signal to throttle control motor relay and battery voltage is not provided to the ECM. The opening angle of the throttle valve is detected by the throttle position sensor which is mounted on the throttle body. The throttle position sensor provides feedback to the ECM. This feedback allows the ECM to control the throttle actuator and monitor the throttle opening angle in response to driver inputs.

OBDII Code P2101 2008 Nissan Rogue - Electric Throttle Control Performance - AutoCodes.com — P2101 2008 Nissan Rogue Code - Electric Throttle Control Performance

What does this mean?

What are the Possible Causes of the DTC P2101 2008 Nissan Rogue?

Faulty Electric Throttle Control (ETC) Actuator
Electric Throttle Control (ETC) Actuator harness is open or shorted
Electric Throttle Control (ETC) Actuator circuit poor electrical connection

How to Fix the DTC P2101 2008 Nissan Rogue?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2101 2008 Nissan Rogue code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2101 2008 Nissan Rogue code?

Need more information on how to fix the P2101 2008 Nissan Rogue code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2101 2008 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2101 2008 Nissan Rogue Code

1. What does OBDII code P2101 mean on a 2008 Nissan Rogue?

The OBDII code P2101 on a 2008 Nissan Rogue indicates an issue with the Electric Throttle Control Performance.

2. What are common symptoms of OBDII code P2101 on a 2008 Nissan Rogue?

Common symptoms of code P2101 on a 2008 Nissan Rogue may include reduced engine power, stalling, hesitation, and the vehicle going into limp mode.

3. What are possible causes of OBDII code P2101 on a 2008 Nissan Rogue?

Possible causes of code P2101 on a 2008 Nissan Rogue include a faulty throttle body, throttle position sensor issues, wiring problems, or a malfunctioning electronic throttle control system.

4. How can I diagnose OBDII code P2101 on a 2008 Nissan Rogue?

Diagnosing code P2101 on a 2008 Nissan Rogue typically involves checking the throttle body and sensor connections, inspecting wiring for damage, and using a scan tool to monitor throttle position sensor readings.

5. Can I still drive my 2008 Nissan Rogue with OBDII code P2101?

It is not recommended to drive a 2008 Nissan Rogue with OBDII code P2101 as it can lead to performance issues and potentially unsafe driving conditions.

6. How can I repair OBDII code P2101 on a 2008 Nissan Rogue?

Repairing code P2101 on a 2008 Nissan Rogue may involve cleaning or replacing the throttle body, repairing wiring connections, or replacing the throttle position sensor.

7. Is it safe to reset the OBDII code P2101 on a 2008 Nissan Rogue with a scan tool?

Resetting the OBDII code P2101 on a 2008 Nissan Rogue with a scan tool may temporarily clear the code, but it is important to diagnose and address the underlying issue to prevent it from recurring.

8. Can a DIY enthusiast fix OBDII code P2101 on a 2008 Nissan Rogue?

Depending on their skill level and access to tools, a DIY enthusiast may be able to address OBDII code P2101 on a 2008 Nissan Rogue by following repair guides and procedures.

9. Will OBDII code P2101 on a 2008 Nissan Rogue cause permanent damage if left unresolved?

If left unresolved, OBDII code P2101 on a 2008 Nissan Rogue can potentially cause further damage to the engine or throttle control system, leading to more extensive and costly repairs.

10. How long does it typically take to repair OBDII code P2101 on a 2008 Nissan Rogue?

The repair time for OBDII code P2101 on a 2008 Nissan Rogue can vary depending on the exact cause of the issue, but it may take anywhere from a few hours to a day to complete the necessary repairs.