P2101 2007 Ford Fusion Code - Throttle Actuator Control Motor Circuit Range/Performance
Quick Answer
The electronic Throttle Actuator Control (TAC) is a DC motor controlled by the Powertrain Control Module (PCM). Common causes include Faulty Throttle Actuator Control Motor, Throttle Actuator Control Motor harness is open, Throttle Actuator Control Motor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2101 2007 Ford Fusion indicates Throttle Actuator Control Motor Circuit Range/Performance.
- Common causes
- Common causes include Faulty Throttle Actuator Control Motor, Throttle Actuator Control Motor harness is open, Throttle Actuator Control Motor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2101 2007 Ford Fusion Description
What are the Possible Causes of the DTC P2101 2007 Ford Fusion?
- Faulty Throttle Actuator Control Motor
- Throttle Actuator Control Motor harness is open
- Throttle Actuator Control Motor circuit poor electrical connection
How to Fix the DTC P2101 2007 Ford Fusion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2101 2007 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2101 2007 Ford Fusion code?
Need more information on how to fix the P2101 2007 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2101 2007 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2101 2007 Ford Fusion Code
What does the OBDII code P2101 mean in a 2007 Ford Fusion?
P2101 indicates a problem with the Throttle Actuator Control (TAC) motor circuit, specifically a range or performance issue.
What are the common symptoms of P2101 in a 2007 Ford Fusion?
Common symptoms include reduced engine power, poor acceleration, the Check Engine Light turning on, and in some cases, the engine entering limp mode.
What causes the P2101 code in a 2007 Ford Fusion?
Possible causes include a faulty throttle body, a damaged throttle actuator motor, wiring issues such as frayed or corroded connections, or a malfunctioning Powertrain Control Module (PCM).
Can I drive my 2007 Ford Fusion with a P2101 code?
Driving with a P2101 code is not recommended as it can cause reduced power and drivability issues that may compromise safety.
How can I diagnose the P2101 code on my 2007 Ford Fusion?
Start by inspecting the throttle body and wiring for damage or corrosion. Use a diagnostic scanner to confirm the code and perform tests on the throttle actuator motor and related circuits.
What tools are needed to fix the P2101 code in a 2007 Ford Fusion?
Basic tools include a diagnostic scanner, multimeter, and possibly a throttle body cleaner or replacement parts if necessary.
How do I fix the P2101 code in my 2007 Ford Fusion?
Repairs may involve cleaning or replacing the throttle body, repairing damaged wiring or connectors, or reprogramming/repairing the PCM if necessary.
How much does it cost to repair a P2101 code on a 2007 Ford Fusion?
The cost varies depending on the issue. Throttle body replacement can range from $200 to $600, while wiring repairs or PCM replacement may cost more.
Can a dirty throttle body cause the P2101 code?
Yes, a dirty or clogged throttle body can impair the throttle actuator's performance, potentially triggering the P2101 code.
Do I need to reset the OBDII system after fixing the P2101 code?
Yes, after completing the repair, use a diagnostic scanner to clear the code and ensure the issue is resolved.
Discuss the causes and fixes for P2101 2007 Ford Fusion OBDII Code
Code P2101 2007 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
