AutoCodes – Nissan – P2100 2013 Nissan Rogue

P2100 2013 Nissan Rogue Code - Throttle Control Motor Relay Circuit Open

Quick Answer

The throttle actuator is operated by the Engine Control Module (ECM) and it opens and closes the throttle valve. Common causes include Dirty throttle body, Faulty Throttle Actuator Control Motor Relay, Throttle Actuator Control Motor Relay harness is open. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2100 2013 Nissan Rogue indicates Throttle Control Motor Relay Circuit Open.
Common causes: Common causes include Dirty throttle body, Faulty Throttle Actuator Control Motor Relay, Throttle Actuator Control Motor Relay harness is open.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 7,209

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Feb 28, 2019

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2100 2013 Nissan Rogue Description

The throttle actuator is operated by the Engine Control Module (ECM) and it opens and closes the throttle valve. Power supply for the throttle control motor is provided to the ECM via throttle control motor relay. The throttle control motor relay is ON/OFF controlled by the ECM. When the ignition switch is turned ON, the ECM sends an ON signal to throttle control motor relay and battery voltage is provided to the ECM. When the ignition switch is turned OFF, the ECM sends an OFF signal to throttle control motor relay and battery voltage is not provided to the ECM. The opening angle of the throttle valve is detected by the throttle position sensor which is mounted on the throttle body. The throttle position sensor provides feedback to the ECM. This feedback allows the ECM to control the throttle actuator and monitor the throttle opening angle in response to driver inputs.

OBDII Code P2100 2013 Nissan Rogue - Throttle Control Motor Relay Circuit Open - AutoCodes.com — P2100 2013 Nissan Rogue Code - Throttle Control Motor Relay Circuit Open

What does this mean?

What are the Possible Causes of the DTC P2100 2013 Nissan Rogue?

Dirty throttle body
Faulty Throttle Actuator Control Motor Relay
Throttle Actuator Control Motor Relay harness is open
Throttle Actuator Control Motor Relay circuit poor electrical connection
Faulty Engine Control Module (ECM)

How to Fix the DTC P2100 2013 Nissan Rogue?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

Check fuses on the IPDM first.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2100 2013 Nissan Rogue code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2100 2013 Nissan Rogue code?

Need more information on how to fix the P2100 2013 Nissan Rogue code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2100 2013 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2100 2013 Nissan Rogue Code

1. What are the common symptoms of OBDII code P2100 in a 2013 Nissan Rogue?

When the Throttle Control Motor Relay Circuit Open error code P2100 occurs in a 2013 Nissan Rogue, common symptoms may include reduced engine power, the vehicle going into "limp mode," and the Check Engine light illuminating.

2. What causes the OBDII code P2100 in a 2013 Nissan Rogue?

The Throttle Control Motor Relay Circuit Open code P2100 in a 2013 Nissan Rogue is typically triggered by a malfunction in the throttle control motor relay circuit, often due to a faulty relay, wiring issues, or a defective throttle body.

3. How serious is the OBDII code P2100 in a 2013 Nissan Rogue?

While the P2100 code may not cause immediate danger, it can affect the vehicle's performance and drivability. It is advisable to address this issue promptly to prevent further complications and ensure optimal operation of the throttle control system.

4. Can I continue driving my 2013 Nissan Rogue with the OBDII code P2100?

It is not recommended to drive your 2013 Nissan Rogue with the P2100 code present, as it can lead to reduced engine power and potential safety hazards. It's best to have the issue diagnosed and repaired by a qualified mechanic before resuming driving.

5. How can I diagnose the OBDII code P2100 in my 2013 Nissan Rogue?

Diagnosing the P2100 code in a 2013 Nissan Rogue involves using an OBDII scanner to retrieve the specific fault code, inspecting the throttle control motor relay circuit for any visible damage, checking the wiring connections, and testing the relay for proper functionality.

6. What is the typical repair for the OBDII code P2100 in a 2013 Nissan Rogue?

The typical repair for the Throttle Control Motor Relay Circuit Open code P2100 in a 2013 Nissan Rogue involves replacing the faulty throttle control motor relay, repairing any damaged wiring, and ensuring proper connection of the components to resolve the issue.

7. Can a DIY enthusiast fix the OBDII code P2100 in a 2013 Nissan Rogue?

While some DIY enthusiasts may have the skills to diagnose and repair the P2100 code, it is recommended to seek assistance from a professional mechanic with experience in dealing with throttle control system issues to ensure proper diagnosis and repair.

8. How much does it cost to fix the OBDII code P2100 in a 2013 Nissan Rogue?

The cost of fixing the P2100 code in a 2013 Nissan Rogue can vary depending on the extent of the issue, the parts required for repair, and the labor rates of the repair shop. It is advisable to obtain quotes from different mechanics to compare prices.

9. Will resetting the OBDII code P2100 in my 2013 Nissan Rogue make it go away permanently?

Resetting the P2100 code in a 2013 Nissan Rogue may clear the Check Engine light temporarily, but if the underlying issue causing the code is not addressed and repaired, the code is likely to reappear. It's important to diagnose and fix the root cause of the problem.

10. Is the OBDII code P2100 covered under warranty for a 2013 Nissan Rogue?

Whether the repair for the P2100 code is covered under warranty for a 2013 Nissan Rogue depends on the specific terms of the vehicle's warranty, its mileage, and any modifications or previous repairs done. Check with your Nissan dealership or refer to your warranty documentation for more information.