P2100 2010 NISSAN SENTRA - Throttle Control Motor Relay Circuit Open
- Dirty throttle body
- Faulty Throttle Actuator Control Motor Relay
- Throttle Actuator Control Motor Relay harness is open
- Throttle Actuator Control Motor Relay circuit poor electrical connection
- Faulty Engine Control Module (ECM)
- Engine Light ON (or Service Engine Soon Warning Light)
P2100 2010 Nissan Sentra DescriptionThe throttle actuator is operated by the Engine Control Module (ECM) and it opens and closes the throttle valve. Power supply for the throttle control motor is provided to the ECM via throttle control motor relay. The throttle control motor relay is ON/OFF controlled by the ECM. When the ignition switch is turned ON, the ECM sends an ON signal to throttle control motor relay and battery voltage is provided to the ECM. When the ignition switch is turned OFF, the ECM sends an OFF signal to throttle control motor relay and battery voltage is not provided to the ECM. The opening angle of the throttle valve is detected by the throttle position sensor which is mounted on the throttle body. The throttle position sensor provides feedback to the ECM. This feedback allows the ECM to control the throttle actuator and monitor the throttle opening angle in response to driver inputs.
Need more help?Get the P2100 2010 Nissan Sentra code diagnosed by a professional: Find a repair shop in your area
P2100 2010 NISSAN SENTRA CommentsHelp us improve AutoCodes.com. Leave a comment below or tell us if the information above help you fix the code. What are the symptoms on your vehicle for the P2100 2010 Nissan Sentra code? Have you replaced any parts?
Any information is appreciated. Thanks