P2100 2009 Ford Fusion Code - Throttle Actuator Control Motor Circuit Open
Quick Answer
The electronic Throttle Actuator Control (TAC) is a DC motor controlled by the Powertrain Control Module (PCM). Common causes include Faulty Throttle Actuator Control Motor, Throttle Actuator Control Motor harness is open, Throttle Actuator Control Motor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2100 2009 Ford Fusion indicates Throttle Actuator Control Motor Circuit Open.
- Common causes
- Common causes include Faulty Throttle Actuator Control Motor, Throttle Actuator Control Motor harness is open, Throttle Actuator Control Motor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2100 2009 Ford Fusion Description
What are the Possible Causes of the DTC P2100 2009 Ford Fusion?
- Faulty Throttle Actuator Control Motor
- Throttle Actuator Control Motor harness is open
- Throttle Actuator Control Motor circuit poor electrical connection
How to Fix the DTC P2100 2009 Ford Fusion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2100 2009 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2100 2009 Ford Fusion code?
Need more information on how to fix the P2100 2009 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2100 2009 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2100 2009 Ford Fusion Code
1. What does the OBDII code P2100 mean for a 2009 Ford Fusion?
P2100 indicates a problem with the Throttle Actuator Control (TAC) motor circuit, specifically an open circuit.
2. What are the common symptoms of code P2100 in a 2009 Ford Fusion?
Symptoms may include reduced engine performance, the throttle not responding, the vehicle going into limp mode, and the check engine light illuminating.
3. What causes the P2100 code to appear on a 2009 Ford Fusion?
Possible causes include a faulty throttle actuator control motor, damaged wiring or connectors in the TAC circuit, a blown fuse, or a defective powertrain control module (PCM).
4. Can I drive my 2009 Ford Fusion with a P2100 code?
It is not advisable to drive with this code as the vehicle may enter limp mode or experience throttle control issues, which could compromise safety.
5. How is the P2100 code diagnosed in a 2009 Ford Fusion?
A mechanic will check for other related codes, inspect the throttle body, test the TAC motor and wiring for continuity, and verify the PCM’s output signals.
6. How do I fix the P2100 code on my 2009 Ford Fusion?
Repairs may involve replacing the throttle actuator control motor, repairing or replacing damaged wiring, replacing a blown fuse, or reprogramming or replacing the PCM.
7. How much does it cost to repair a P2100 code on a 2009 Ford Fusion?
The cost depends on the specific repair needed. Replacing a throttle actuator motor can cost $300-$600, while addressing wiring issues or PCM replacement may vary.
8. Can a dirty throttle body cause a P2100 code on a 2009 Ford Fusion?
While a dirty throttle body is not a direct cause, it can contribute to throttle actuator motor issues. Cleaning the throttle body might help in some cases.
9. Will clearing the code fix the P2100 problem on a 2009 Ford Fusion?
Clearing the code without addressing the underlying issue will not fix the problem, and the code will likely return.
10. Is the P2100 code related to other throttle-related codes on a 2009 Ford Fusion?
Yes, it is often accompanied by other throttle body or TAC-related codes, such as P2110 or P2111, which should be addressed together.
Discuss the causes and fixes for P2100 2009 Ford Fusion OBDII Code
Code P2100 2009 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
