P2100 2008 NISSAN ROGUE - Throttle Control Motor Relay Circuit Open
Tech notesCheck fuses on the IPDM first.
P2100 2008 Nissan Rogue DescriptionThe throttle actuator is operated by the Engine Control Module (ECM) and it opens and closes the throttle valve. Power supply for the throttle control motor is provided to the ECM via throttle control motor relay. The throttle control motor relay is ON/OFF controlled by the ECM. When the ignition switch is turned ON, the ECM sends an ON signal to throttle control motor relay and battery voltage is provided to the ECM. When the ignition switch is turned OFF, the ECM sends an OFF signal to throttle control motor relay and battery voltage is not provided to the ECM. The opening angle of the throttle valve is detected by the throttle position sensor which is mounted on the throttle body. The throttle position sensor provides feedback to the ECM. This feedback allows the ECM to control the throttle actuator and monitor the throttle opening angle in response to driver inputs.
Need more help?Do you need more help with the P2100 2008 Nissan Rogue code? Ask a question to our users or find an automotive repair shop near you to help fix the OBDII code
P2100 2008 NISSAN ROGUE CommentsHelp us improve AutoCodes.com. Leave a comment below or tell us if the information above help you fix the code. What are the symptoms on your vehicle for the P2100 2008 Nissan Rogue code? Have you replaced any parts?
Any information is appreciated. Thanks