AutoCodes – Ford – P2100 2008 Ford Fusion

P2100 2008 Ford Fusion Code - Throttle Actuator Control Motor Circuit Open

Quick Answer

The electronic Throttle Actuator Control (TAC) is a DC motor controlled by the Powertrain Control Module (PCM). Common causes include Faulty Throttle Actuator Control Motor, Throttle Actuator Control Motor harness is open, Throttle Actuator Control Motor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2100 2008 Ford Fusion indicates Throttle Actuator Control Motor Circuit Open.
Common causes: Common causes include Faulty Throttle Actuator Control Motor, Throttle Actuator Control Motor harness is open, Throttle Actuator Control Motor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 2,763

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Feb 27, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2100 2008 Ford Fusion Description

The electronic Throttle Actuator Control (TAC) is a DC motor controlled by the Powertrain Control Module (PCM). There are 2 designs for the TAC, parallel and inline. The parallel design has the motor under the bore parallel to the plate shaft. The motor housing is integrated into the main housing. The inline design has a separate motor housing. An internal spring is used in both designs to return the throttle plate to a default position. The default position is typically a throttle angle of 7 to 8 degrees from the hard stop angle. The closed throttle plate hard stop prevents the throttle from binding in the bore. This hard stop setting is not adjustable and is set to result in less airflow than the minimum engine airflow required at idle.

OBDII Code P2100 2008 Ford Fusion - Throttle Actuator Control Motor Circuit Open - AutoCodes.com — P2100 2008 Ford Fusion Code - Throttle Actuator Control Motor Circuit Open

What does this mean?

What are the Possible Causes of the DTC P2100 2008 Ford Fusion?

Faulty Throttle Actuator Control Motor
Throttle Actuator Control Motor harness is open
Throttle Actuator Control Motor circuit poor electrical connection

How to Fix the DTC P2100 2008 Ford Fusion?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2100 2008 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2100 2008 Ford Fusion code?

Need more information on how to fix the P2100 2008 Ford Fusion code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2100 2008 Ford Fusion code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2100 2008 Ford Fusion Code

1. What are the common symptoms of OBDII code P2100 on a 2008 Ford Fusion?

The common symptoms of code P2100 include the vehicle entering limp mode, a noticeable lack of power, and the Check Engine Light illuminating on the dashboard.

2. What does the OBDII code P2100 indicate on a 2008 Ford Fusion?

Code P2100 indicates a problem with the Throttle Actuator Control Motor Circuit being open, which can result in issues with the throttle body's operation.

3. What are the possible causes of OBDII code P2100 on a 2008 Ford Fusion?

Possible causes of code P2100 include a faulty throttle actuator control motor, damaged wiring or connectors in the circuit, or a problem with the throttle position sensor.

4. How can I diagnose the cause of OBDII code P2100 on my 2008 Ford Fusion?

Diagnosing code P2100 may involve visually inspecting wiring and connectors, testing the throttle actuator motor, and checking the throttle position sensor's readings using a diagnostic scanner.

5. Can I still drive my 2008 Ford Fusion with OBDII code P2100?

It is not recommended to drive your vehicle with code P2100 present, as it can lead to unsafe driving conditions and potential further damage to the throttle system.

6. How can I repair OBDII code P2100 on my 2008 Ford Fusion?

Repairing code P2100 may involve replacing the throttle actuator control motor, repairing damaged wiring or connectors, or recalibrating the throttle position sensor.

7. Will resetting the OBDII code P2100 on my 2008 Ford Fusion make it go away permanently?

Simply resetting the code may temporarily clear the Check Engine Light, but if the underlying issue causing code P2100 is not addressed, the code is likely to reappear.

8. Is OBDII code P2100 a common issue in 2008 Ford Fusion vehicles?

While not extremely common, OBDII code P2100 can occur in 2008 Ford Fusion vehicles due to various factors affecting the throttle actuator control system.

9. Can a DIY enthusiast fix OBDII code P2100 on a 2008 Ford Fusion?

Depending on your skill level and access to tools, a DIY enthusiast may be able to diagnose and repair code P2100 on a 2008 Ford Fusion, but it is recommended to seek professional assistance for complex issues.

10. How can I prevent OBDII code P2100 from occurring on my 2008 Ford Fusion in the future?

Regular maintenance, such as cleaning the throttle body and ensuring proper electrical connections, can help prevent issues leading to code P2100 in your 2008 Ford Fusion.