P2100 2000 FORD F150 - Throttle Actuator Control Motor Circuit Open
- Faulty Throttle Actuator Control Motor
- Throttle Actuator Control Motor harness is open
- Throttle Actuator Control Motor circuit poor electrical connection
When is the code detected?A powertrain control module (PCM) fault flag is set indicating the motor circuit is open, and may require cycling the key.
- Engine Light ON (or Service Engine Soon Warning Light)
P2100 2000 Ford F150 DescriptionThe electronic Throttle Actuator Control (TAC) is a DC motor controlled by the Powertrain Control Module (PCM). There are 2 designs for the TAC, parallel and inline. The parallel design has the motor under the bore parallel to the plate shaft. The motor housing is integrated into the main housing. The inline design has a separate motor housing. An internal spring is used in both designs to return the throttle plate to a default position. The default position is typically a throttle angle of 7 to 8 degrees from the hard stop angle. The closed throttle plate hard stop prevents the throttle from binding in the bore. This hard stop setting is not adjustable and is set to result in less airflow than the minimum engine airflow required at idle.
Need more help?Get the P2100 2000 Ford F150 code diagnosed by a professional: Find a repair shop in your area
P2100 2000 FORD F150 CommentsHelp us improve AutoCodes.com. Leave a comment below or tell us if the information above help you fix the code. What are the symptoms on your vehicle for the P2100 2000 Ford F150 code? Have you replaced any parts?
Any information is appreciated. Thanks