AutoCodes – Ford – P20F0 Ford

P20F0 Ford Code - SCR NOx Catalyst Over Temperature Bank 2

Quick Answer

The Selective Catalyst Reduction (SCR) catalyst is monitored to ensure it is capable of NOx conversion. Common causes include Faulty NOx Sensor, Diesel Exhaust Fluid, Faulty Selective Catalyst Reduction (SCR) Catalyst. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P20F0 Ford indicates SCR NOx Catalyst Over Temperature Bank 2.
Common causes: Common causes include Faulty NOx Sensor, Diesel Exhaust Fluid, Faulty Selective Catalyst Reduction (SCR) Catalyst.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 2,377

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 14, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P20F0 Ford Description

The Selective Catalyst Reduction (SCR) catalyst is monitored to ensure it is capable of NOx conversion. The concentration of NOx upstream of the SCR is calculated based on a model. NOx concentration downstream of the SCR is measured with a NOx sensor. Using these concentrations, the cumulative efficiency of the SCR catalyst is calculated and compared to a threshold. If the cumulative efficiency is below this threshold for a sufficient period of time, a fault will be indicated.
The reductant, Diesel Exhaust Fluid (DEF), which is used as part of the SCR catalyst reaction, is monitored to ensure the tank is not refilled with an improper reductant. Upon detection of a refill event, the monitor is activated. After the SCR Catalyst Efficiency Monitor has completed and the SCR has been determined to be functional, the efficiency monitor continues to calculate the cumulative efficiency of the system. Each subsequent value for cumulative efficiency is included in two filtering routines, one for short term efficiency and the other for long term efficiency. If the difference between the two filtered efficiencies becomes greater than a threshold, a fault is indicated. the short term efficiency needs to be less than 0.20 and the delta between short and long term efficiency needs to be greater than 0.10.

OBDII Code P20F0 Ford - SCR NOx Catalyst Over Temperature Bank 2 - AutoCodes.com — P20F0 Ford Code - SCR NOx Catalyst Over Temperature Bank 2

What does this mean?

What are the Possible Causes of the DTC P20F0 Ford?

Faulty NOx Sensor
Diesel Exhaust Fluid
Faulty Selective Catalyst Reduction (SCR) Catalyst

How to Fix the DTC P20F0 Ford?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P20F0 Ford code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P20F0 Ford code?

Need more information on how to fix the P20F0 Ford code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P20F0 Ford code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.