P20E9 2014 Chevrolet Silverado Code - Reductant High Pressure
Quick Answer
The pressure sensor information is used by Reductant Control Module; this module manages the reductant pressure system driving the PWM signal to the pump (corresponding to a speed setpoint for the reductant pressure pump) in order to build the pressure in the reductant pressure pipeline after the system start-up. Common causes include Faulty Reductant Injector, Reductant Injector harness is open or shorted, Reductant Injector circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P20E9 2014 Chevrolet Silverado indicates Reductant High Pressure.
- Common causes
- Common causes include Faulty Reductant Injector, Reductant Injector harness is open or shorted, Reductant Injector circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P20E9 2014 Chevrolet Silverado Description
What are the Possible Causes of the DTC P20E9 2014 Chevrolet Silverado?
- Faulty Reductant Injector
- Reductant Injector harness is open or shorted
- Reductant Injector circuit poor electrical connection
- Faulty Reductant Pump and Sensor Assembly
How to Fix the DTC P20E9 2014 Chevrolet Silverado?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P20E9 2014 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P20E9 2014 Chevrolet Silverado code?
Need more information on how to fix the P20E9 2014 Chevrolet Silverado code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P20E9 2014 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P20E9 2014 Chevrolet Silverado Code
1. What are the common symptoms of OBDII code P20E9 in a 2014 Chevrolet Silverado?
The common symptoms of code P20E9 "Reductant High Pressure" may include a check engine light, reduced engine power, and potentially poor vehicle performance.
2. What causes the OBDII code P20E9 in a 2014 Chevrolet Silverado?
The P20E9 code in a 2014 Chevrolet Silverado is typically triggered by issues related to the reductant pressure sensor or the reductant pump module within the Selective Catalyst Reduction (SCR) system.
3. How serious is the OBDII code P20E9 in a 2014 Chevrolet Silverado?
While the P20E9 code may not cause immediate harm to the vehicle, it is important to address it promptly to prevent potential damage to the SCR system and ensure proper emissions control.
4. Can I continue driving my 2014 Chevrolet Silverado with OBDII code P20E9 active?
It is not recommended to continue driving your Silverado with an active P20E9 code, as it can lead to increased emissions and reduced engine efficiency. It's advisable to address the issue as soon as possible.
5. How can I diagnose the OBDII code P20E9 in my 2014 Chevrolet Silverado?
Diagnosing the P20E9 code involves using an OBDII scanner to retrieve the specific fault code, checking the reductant system components for any visible damage or leaks, and testing the pressure sensor and pump for proper functionality.
6. What are some repair tips for fixing OBDII code P20E9 in a 2014 Chevrolet Silverado?
Repairing the P20E9 code may involve replacing the reductant pressure sensor, reductant pump module, or addressing any wiring issues related to the SCR system. It's recommended to follow the manufacturer's diagnostic and repair procedures.
7. Can I reset the OBDII code P20E9 in my 2014 Chevrolet Silverado without fixing the underlying issue?
While you can clear the P20E9 code using an OBDII scanner, it will likely reappear if the root cause of the issue is not addressed. It's important to fix the underlying problem to prevent further issues.
8. Is it possible to prevent OBDII code P20E9 in a 2014 Chevrolet Silverado?
Regular maintenance of the SCR system, including checking for leaks, ensuring proper fluid levels, and addressing any warning lights promptly, can help prevent the occurrence of the P20E9 code in your Silverado.
9. How much does it cost to repair OBDII code P20E9 in a 2014 Chevrolet Silverado?
The cost of repairing the P20E9 code in a 2014 Chevrolet Silverado can vary depending on the specific cause of the issue, the required parts, and labor costs. It's advisable to consult a mechanic for an accurate estimate.
10. Can a DIY enthusiast fix OBDII code P20E9 in a 2014 Chevrolet Silverado?
While some aspects of diagnosing and repairing the P20E9 code may be within reach of a skilled DIY enthusiast, dealing with the SCR system components and emissions-related issues should be approached with caution. It's recommended to seek professional help if unsure.
Discuss the causes and fixes for P20E9 2014 Chevrolet Silverado OBDII Code
Code P20E9 2014 Chevrolet Silverado comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
