P2096 2013 NISSAN ROGUE - Post Catalytic Fuel Trim System Too Lean Bank 1
When is the code detected?The output voltage computed by ECM from the A/F sensor 1 signal is shifts to the lean side for a specified period.
P2096 2013 Nissan Rogue DescriptionThe air fuel ratio (A/F) sensor 1 is a planar one-cell limit current sensor. The sensor element of the A/F sensor 1 is composed an electrode layer, which transports ions. It has a heater in the element. The sensor is capable of precise measurement λ= 1, but also in the lean and rich range. Together with its control electronics, the sensor outputs a clear, continuous signal throughout a wide λ range. The exhaust gas components diffuse through the diffusion layer at the sensor cell. An electrode layer is applied voltage, and this current relative oxygen density in lean. Also this current relative hydrocarbon density in rich.
Therefore, the A/F sensor 1 is able to indicate air fuel ratio by this
electrode layer of current. In addition, a heater is integrated in the
sensor to ensure the required operating temperature of approximately
Need more help?Do you need more help with the P2096 2013 Nissan Rogue code? Ask a question to our users or find an automotive repair shop near you to help fix the OBDII code
P2096 2013 NISSAN ROGUE CommentsHelp us improve AutoCodes.com. Leave a comment below or tell us if the information above help you fix the code. What are the symptoms on your vehicle for the P2096 2013 Nissan Rogue code? Have you replaced any parts?
Any information is appreciated. Thanks