AutoCodes – Dodge – P2093 Dodge

P2093 Dodge Code - 'A' Camshaft Position Actuator Control Circuit High Bank 2

Quick Answer

The Camshaft Position (CMP) Actuator system enables the Engine Control Module (ECM) to change the timing of the camshafts while the engine is operating. Common causes include Faulty Intake Camshaft Position Actuator Solenoid Bank 2, Intake Camshaft Position Actuator Solenoid Bank 2 harness is open or shorted, Intake Camshaft Position Actuator Solenoid Bank 2 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2093 Dodge indicates 'A' Camshaft Position Actuator Control Circuit High Bank 2.
Common causes: Common causes include Faulty Intake Camshaft Position Actuator Solenoid Bank 2, Intake Camshaft Position Actuator Solenoid Bank 2 harness is open or shorted, Intake Camshaft Position Actuator Solenoid Bank 2 circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 3,348

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Dec 15, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2093 Dodge Description

The Camshaft Position (CMP) Actuator system enables the Engine Control Module (ECM) to change the timing of the camshafts while the engine is operating. The CMP actuator solenoid signal from the ECM is Pulse Width Modulated (PWM). The ECM controls the CMP actuator solenoid duty cycle by controlling the amount of solenoid ON time. The CMP actuator solenoid controls the advance or the retard of each camshaft. The CMP actuator solenoid controls the oil flow that applies the pressure to advance or retard the camshafts.
Ignition voltage is supplied directly to the CMP actuator solenoid. The ECM controls the solenoid by grounding the control circuit with a solid-state device called a driver. The driver is equipped with a feedback circuit that is pulled-up to a voltage. The ECM can determine if the control circuit is open, shorted to ground, or shorted to a voltage by monitoring the feedback voltage.
The Diagnostic Trouble Code (DTC) will set if the ECM detects a short to voltage in the CMP actuator solenoid circuits for more than 4 seconds or a cumulative of 50 seconds, when the solenoid is commanded ON.

OBDII Code P2093 Dodge - 'A' Camshaft Position Actuator Control Circuit High Bank 2 - AutoCodes.com — P2093 Dodge Code - 'A' Camshaft Position Actuator Control Circuit High Bank 2

What does this mean?

What are the Possible Causes of the DTC P2093 Dodge?

Faulty Intake Camshaft Position Actuator Solenoid Bank 2
Intake Camshaft Position Actuator Solenoid Bank 2 harness is open or shorted
Intake Camshaft Position Actuator Solenoid Bank 2 circuit poor electrical connection
Faulty Engine Control Module (ECM)

How to Fix the DTC P2093 Dodge?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2093 Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2093 Dodge code?

Need more information on how to fix the P2093 Dodge code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2093 Dodge code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.