P2090 Chrysler Code - Bank 1 Camshaft 2 Position Actuator
Quick Answer
The Diagnostic Trouble Code (DTC) will set when the v detects that the Camshaft 1/2 Position Solenoid input voltage is below the minimum acceptable value. Common causes include Faulty Camshaft 1/2 Position Solenoid, Camshaft 1/2 Position Solenoid harness is open or shorted, Camshaft 1/2 Position Solenoid circuit poor electrical connection. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
- What it means
- P2090 Chrysler indicates Bank 1 Camshaft 2 Position Actuator.
- Common causes
- Common causes include Faulty Camshaft 1/2 Position Solenoid, Camshaft 1/2 Position Solenoid harness is open or shorted, Camshaft 1/2 Position Solenoid circuit poor electrical connection.
- Severity
- Low - monitor the vehicle and repair when practical.
- Can I drive?
- The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
Code P2090 Chrysler Description
What are the Possible Causes of the DTC P2090 Chrysler?
- Faulty Camshaft 1/2 Position Solenoid
- Camshaft 1/2 Position Solenoid harness is open or shorted
- Camshaft 1/2 Position Solenoid circuit poor electrical connection
- Faulty Powertrain Control Module (PCM)
How to Fix the DTC P2090 Chrysler?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2090 Chrysler code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2090 Chrysler code?
Need more information on how to fix the P2090 Chrysler code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2090 Chrysler code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2090 Chrysler Code
1. What does OBDII code P2090 mean for a Chrysler?
P2090 indicates an issue with the camshaft position actuator for Bank 1, Camshaft 2, where the actuator is not functioning as expected.
2. What are the common symptoms of code P2090?
Symptoms may include rough idling, reduced engine performance, poor fuel economy, and the Check Engine Light illuminating.
3. What causes the P2090 code to appear on a Chrysler?
Common causes include a malfunctioning camshaft position actuator, wiring issues, a faulty camshaft position sensor, or low engine oil levels.
4. Can low engine oil cause the P2090 code?
Yes, insufficient or dirty engine oil can affect the operation of the camshaft position actuator and trigger the P2090 code.
5. How can I diagnose the P2090 code on my Chrysler?
Start by checking the engine oil level and quality, inspecting the wiring and connectors around the camshaft position actuator, and testing the actuator and camshaft position sensor.
6. Is it safe to drive with the P2090 code?
It’s not recommended to drive for extended periods, as it could lead to further engine damage or reduced performance.
7. How do I fix the P2090 code?
Repairs may include replacing the camshaft position actuator, fixing damaged wiring, replacing the camshaft position sensor, or changing the engine oil and filter.
8. Can a bad camshaft position sensor cause the P2090 code?
Yes, a faulty camshaft position sensor may provide incorrect data to the engine control module, resulting in the P2090 code.
9. What does Bank 1, Camshaft 2 refer to in the P2090 code?
Bank 1 refers to the side of the engine with cylinder 1, and Camshaft 2 typically refers to the exhaust camshaft on that side.
10. How much does it cost to repair the P2090 code on a Chrysler?
Repair costs vary but may range from $150 to $500, depending on whether you need to replace the camshaft actuator, sensor, or perform other repairs.
Discuss the causes and fixes for P2090 Chrysler OBDII Code
Code P2090 Chrysler comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
