P207E Mercury Code - Intake Manifold Tuning Valve Position Sensor/Switch Circuit Intermittent Bank 2
Quick Answer
The Intake Manifold Tuning Valve (IMTV) is a motorized actuated unit mounted directly to the intake manifold. Common causes include Faulty Intake Manifold Tuning Valve Position Sensor/Switch, Intake Manifold Tuning Valve Position Sensor/Switch harness is open or shorted, Intake Manifold Tuning Valve Position Sensor/Switch circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P207E Mercury indicates Intake Manifold Tuning Valve Position Sensor/Switch Circuit Intermittent Bank 2.
- Common causes
- Common causes include Faulty Intake Manifold Tuning Valve Position Sensor/Switch, Intake Manifold Tuning Valve Position Sensor/Switch harness is open or shorted, Intake Manifold Tuning Valve Position Sensor/Switch circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P207E Mercury Description
The motorized IMTV unit will not be energized below approximately 2600 rpm or higher on some vehicles. The shutter will be in the closed position not allowing airflow blend to occur in the intake manifold. Above approximately 2600 rpm or higher, the motorized unit will be energized. The motorized unit will be commanded on by the PCM initially at a 100 percent duty cycle to move the shutter to the open position and then falling to approximately 50 percent to continue to hold the shutter open.
The Intake Manifold Tuning Valve (IMTV) system is monitored for failure during continuous, Key ON Engine OFF (KOEO), or Key ON Engine Running (KOER) self-tests. The test fails when the signal is more or less than an expected calibrated range.
What are the Possible Causes of the DTC P207E Mercury?
- Faulty Intake Manifold Tuning Valve Position Sensor/Switch
- Intake Manifold Tuning Valve Position Sensor/Switch harness is open or shorted
- Intake Manifold Tuning Valve Position Sensor/Switch circuit poor electrical connection
- Faulty Intake Manifold Tuning Valve (IMTV)
- Faulty Intake Manifold Runner Control (IMRC)
- Faulty Powertrain Control Module (PCM)
How to Fix the DTC P207E Mercury?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P207E Mercury code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P207E Mercury code?
Need more information on how to fix the P207E Mercury code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P207E Mercury code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P207E Mercury Code
1. What are the common symptoms of OBDII code P207E in a Mercury vehicle?
- Common symptoms include rough idling, poor engine performance, decreased fuel efficiency, and the illumination of the check engine light.
2. What are the possible causes of the Intake Manifold Tuning Valve Position Sensor/Switch Circuit Intermittent Bank 2 error code in a Mercury?
- Possible causes include a faulty intake manifold tuning valve position sensor or switch, wiring issues, a vacuum leak, or a problem with the intake manifold itself.
3. How can I diagnose the P207E code on my Mercury related to the intake manifold tuning valve position sensor/switch circuit?
- A diagnostic scan tool can help pinpoint the exact cause of the issue by reading the code and providing data on sensor readings and circuit performance.
4. Is it safe to continue driving a Mercury with the P207E trouble code?
- It is not recommended to drive the vehicle for an extended period with this code as it can lead to further engine damage and decreased performance.
5. Can I repair the Intake Manifold Tuning Valve Position Sensor/Switch Circuit Intermittent Bank 2 issue in my Mercury myself?
- Depending on your expertise, you may be able to address the issue by checking for loose connections, inspecting the wiring harness, or replacing the sensor or switch.
6. How much does it typically cost to fix the P207E error code in a Mercury vehicle?
- The cost of repair can vary depending on the specific cause of the issue, but it may range from $100 for a simple fix to $500 or more for more complex repairs involving parts replacement.
7. Are there any preventive measures I can take to avoid encountering the P207E code in my Mercury?
- Regular maintenance, such as checking for vacuum leaks, keeping the intake manifold clean, and inspecting sensor connections, can help prevent issues that trigger this error code.
8. Will resetting the OBDII system clear the P207E code in my Mercury?
- Resetting the system may temporarily clear the code, but if the underlying issue is not addressed, the code is likely to reappear once the problem resurfaces.
9. Can a faulty intake manifold tuning valve position sensor affect other aspects of my Mercury's performance?
- Yes, a faulty sensor can lead to a variety of performance issues such as decreased fuel efficiency, rough idling, and overall engine inefficiency.
10. How urgent is it to address the P207E code in my Mercury?
- It is important to address the issue promptly to prevent further damage to the engine and ensure optimal performance of your vehicle.
Discuss the causes and fixes for P207E Mercury OBDII Code
Code P207E Mercury comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
