P207D Code - Intake Manifold Tuning Valve Position Sensor/Switch Circuit High Bank 2
Quick Answer
The Intake Manifold Tuning Valve (IMTV) is a motorized actuated unit mounted directly to the intake manifold. Common causes include Faulty Intake Manifold Tuning Valve Position Sensor/Switch, Intake Manifold Tuning Valve Position Sensor/Switch harness is open or shorted, Intake Manifold Tuning Valve Position Sensor/Switch circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P207D indicates Intake Manifold Tuning Valve Position Sensor/Switch Circuit High Bank 2.
- Common causes
- Common causes include Faulty Intake Manifold Tuning Valve Position Sensor/Switch, Intake Manifold Tuning Valve Position Sensor/Switch harness is open or shorted, Intake Manifold Tuning Valve Position Sensor/Switch circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P207D Description
The motorized IMTV unit will not be energized below approximately 2600 rpm or higher on some vehicles. The shutter will be in the closed position not allowing airflow blend to occur in the intake manifold. Above approximately 2600 rpm or higher, the motorized unit will be energized. The motorized unit will be commanded on by the PCM initially at a 100 percent duty cycle to move the shutter to the open position and then falling to approximately 50 percent to continue to hold the shutter open.
The Intake Manifold Tuning Valve (IMTV) system is monitored for failure during continuous, Key ON Engine OFF (KOEO), or Key ON Engine Running (KOER) self-tests. The test fails when the signal is more or less than an expected calibrated range.
What are the Possible Causes of the DTC P207D?
- Faulty Intake Manifold Tuning Valve Position Sensor/Switch
- Intake Manifold Tuning Valve Position Sensor/Switch harness is open or shorted
- Intake Manifold Tuning Valve Position Sensor/Switch circuit poor electrical connection
- Faulty Intake Manifold Tuning Valve (IMTV)
- Faulty Intake Manifold Runner Control (IMRC)
- Faulty Powertrain Control Module (PCM)
How to Fix the DTC P207D?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P207D code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P207D code?
Need more information on how to fix the P207D code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P207D code diagnosed by a professional: Find a repair shop in your area
Information for Specific Makes
- P207D Ford — Intake Manifold Tuning Valve Position Sensor/Switch Circuit High Bank 2
- P207D Lincoln — Intake Manifold Tuning Valve Position Sensor/Switch Circuit High Bank 2
- P207D Mercury — Intake Manifold Tuning Valve Position Sensor/Switch Circuit High Bank 2
Frequently Asked Questions about P207D Code
1. What are the common symptoms of OBDII code P207D?
Symptoms of code P207D may include poor engine performance, reduced fuel efficiency, rough idling, and illuminated Check Engine Light.
2. What does the OBDII code P207D indicate?
Code P207D indicates a high voltage condition in the circuit of the intake manifold tuning valve position sensor/switch for bank 2.
3. What are the possible causes of OBDII code P207D?
Possible causes of code P207D include a faulty intake manifold tuning valve position sensor/switch, wiring issues, vacuum leaks, or a problem with the engine control module.
4. How can I diagnose the cause of OBDII code P207D?
Diagnosing code P207D typically involves using a scan tool to check for the code, inspecting the intake manifold tuning valve position sensor/switch and its wiring, and performing tests to determine the root cause.
5. Can I drive my vehicle with OBDII code P207D?
It is not recommended to drive your vehicle with an unresolved P207D code, as it can lead to further damage and poor engine performance. It's best to address the issue promptly.
6. How can I repair OBDII code P207D?
Repairing code P207D may involve replacing the intake manifold tuning valve position sensor/switch, repairing any damaged wiring, fixing vacuum leaks, or reprogramming the engine control module.
7. Are there any DIY tips for fixing OBDII code P207D?
While diagnosing and repairing code P207D may require some technical knowledge and tools, simple tasks like checking for loose connections or damaged wires can sometimes resolve the issue.
8. How much does it cost to fix OBDII code P207D at a repair shop?
The cost of fixing code P207D at a repair shop can vary depending on the exact cause of the issue, parts needed for replacement, and labor costs. It's advisable to get estimates from different shops.
9. Can a faulty intake manifold tuning valve position sensor cause code P207D?
Yes, a faulty intake manifold tuning valve position sensor is a common cause of code P207D, as it can lead to incorrect voltage readings and trigger the Check Engine Light.
10. Is it important to reset the Check Engine Light after fixing OBDII code P207D?
Yes, it is recommended to reset the Check Engine Light after fixing code P207D to clear the error code from the vehicle's memory and ensure that the issue has been properly resolved.
Discuss the causes and fixes for P207D OBDII Code
Code P207D comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
