P2078 Chrysler Code - Intake Manifold Tuning Valve Position Sensor/Switch Circuit High Bank 1
Quick Answer
The Intake Manifold Tuning Valve (IMTV) is a motorized actuated unit mounted directly to the intake manifold. Common causes include Faulty Intake Manifold Tuning Valve Position Sensor/Switch, Intake Manifold Tuning Valve Position Sensor/Switch harness is open or shorted, Intake Manifold Tuning Valve Position Sensor/Switch circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2078 Chrysler indicates Intake Manifold Tuning Valve Position Sensor/Switch Circuit High Bank 1.
- Common causes
- Common causes include Faulty Intake Manifold Tuning Valve Position Sensor/Switch, Intake Manifold Tuning Valve Position Sensor/Switch harness is open or shorted, Intake Manifold Tuning Valve Position Sensor/Switch circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2078 Chrysler Description
The motorized IMTV unit will not be energized below approximately 2600 rpm or higher on some vehicles. The shutter will be in the closed position not allowing airflow blend to occur in the intake manifold. Above approximately 2600 rpm or higher, the motorized unit will be energized. The motorized unit will be commanded on by the PCM initially at a 100 percent duty cycle to move the shutter to the open position and then falling to approximately 50 percent to continue to hold the shutter open.
The Intake Manifold Tuning Valve (IMTV) system is monitored for failure during continuous, Key ON Engine OFF (KOEO), or Key ON Engine Running (KOER) self-tests. The test fails when the signal is more or less than an expected calibrated range.
What are the Possible Causes of the DTC P2078 Chrysler?
- Faulty Intake Manifold Tuning Valve Position Sensor/Switch
- Intake Manifold Tuning Valve Position Sensor/Switch harness is open or shorted
- Intake Manifold Tuning Valve Position Sensor/Switch circuit poor electrical connection
- Faulty Intake Manifold Tuning Valve (IMTV)
- Faulty Intake Manifold Runner Control (IMRC)
- Faulty Powertrain Control Module (PCM)
How to Fix the DTC P2078 Chrysler?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2078 Chrysler code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2078 Chrysler code?
Need more information on how to fix the P2078 Chrysler code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2078 Chrysler code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2078 Chrysler Code
What does the OBDII code P2078 mean for a Chrysler vehicle?
Code P2078 indicates a problem with the Intake Manifold Tuning Valve Position Sensor/Switch Circuit on Bank 1, specifically showing a high voltage condition.
What are the symptoms of code P2078 in a Chrysler?
Symptoms may include reduced engine performance, poor fuel economy, rough idling, or an illuminated check engine light.
What causes the P2078 code to appear in a Chrysler?
Common causes include a faulty intake manifold tuning valve, damaged wiring or connectors, or a malfunctioning position sensor.
Can driving with code P2078 damage my Chrysler?
While it may not cause immediate damage, prolonged driving with this code can lead to reduced efficiency and potential engine strain.
How is code P2078 diagnosed in a Chrysler?
A technician will inspect the sensor, wiring, and connectors, check for voltage irregularities, and may perform a scan tool test to verify the valve’s operation.
Can I fix code P2078 myself?
If you have experience with automotive repairs, you can check for loose or damaged wiring and connectors around the intake manifold tuning valve. Replacing the sensor may require advanced tools.
How much does it cost to repair code P2078 on a Chrysler?
Repairs can range from $100 to $500 depending on whether the sensor, valve, or wiring needs replacement and the labor cost.
What tools are needed to troubleshoot code P2078?
Basic tools like a multimeter for testing voltage, a scan tool for reading live data, and standard hand tools for accessing the intake manifold are typically required.
How can I prevent code P2078 from occurring?
Regular maintenance, including checking the intake manifold and related components for wear or damage, can help prevent this code.
Does code P2078 affect engine emissions?
Yes, a malfunctioning intake manifold tuning valve can negatively impact emissions, potentially leading to a failed smog test.
Discuss the causes and fixes for P2078 Chrysler OBDII Code
Code P2078 Chrysler comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
