P2076 Dodge Code - Intake Manifold Tuning Valve Position Sensor/Switch Circuit Range/Performance Bank 1
Quick Answer
The Intake Manifold Tuning Valve (IMTV) is a motorized actuated unit mounted directly to the intake manifold. Common causes include Faulty Intake Manifold Tuning Valve Position Sensor/Switch, Intake Manifold Tuning Valve Position Sensor/Switch harness is open or shorted, Intake Manifold Tuning Valve Position Sensor/Switch circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2076 Dodge indicates Intake Manifold Tuning Valve Position Sensor/Switch Circuit Range/Performance Bank 1.
- Common causes
- Common causes include Faulty Intake Manifold Tuning Valve Position Sensor/Switch, Intake Manifold Tuning Valve Position Sensor/Switch harness is open or shorted, Intake Manifold Tuning Valve Position Sensor/Switch circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2076 Dodge Description
The motorized IMTV unit will not be energized below approximately 2600 rpm or higher on some vehicles. The shutter will be in the closed position not allowing airflow blend to occur in the intake manifold. Above approximately 2600 rpm or higher, the motorized unit will be energized. The motorized unit will be commanded on by the PCM initially at a 100 percent duty cycle to move the shutter to the open position and then falling to approximately 50 percent to continue to hold the shutter open.
The Intake Manifold Tuning Valve (IMTV) system is monitored for failure during continuous, Key ON Engine OFF (KOEO), or Key ON Engine Running (KOER) self-tests. The test fails when the signal is more or less than an expected calibrated range.
What are the Possible Causes of the DTC P2076 Dodge?
- Faulty Intake Manifold Tuning Valve Position Sensor/Switch
- Intake Manifold Tuning Valve Position Sensor/Switch harness is open or shorted
- Intake Manifold Tuning Valve Position Sensor/Switch circuit poor electrical connection
- Faulty Intake Manifold Tuning Valve (IMTV)
- Faulty Intake Manifold Runner Control (IMRC)
- Faulty Powertrain Control Module (PCM)
How to Fix the DTC P2076 Dodge?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2076 Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2076 Dodge code?
Need more information on how to fix the P2076 Dodge code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2076 Dodge code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2076 Dodge Code
1. What does the OBDII code P2076 mean on a Dodge vehicle?
P2076 indicates an issue with the Intake Manifold Tuning Valve (IMTV), specifically a problem with its position sensor or switch circuit range/performance on Bank 1.
2. What are the symptoms of the P2076 code on a Dodge?
Common symptoms include reduced engine performance, poor fuel efficiency, hesitation during acceleration, and the Check Engine Light being illuminated.
3. What causes the P2076 code to appear on a Dodge?
Potential causes include a faulty intake manifold tuning valve, damaged wiring or connectors, carbon buildup on the valve, or issues with the IMTV position sensor.
4. Can I drive my Dodge with the P2076 code?
While the vehicle may still be drivable, ignoring the code can lead to reduced engine performance and potential long-term damage. It’s best to diagnose and repair the issue promptly.
5. How can I fix the P2076 code on my Dodge?
Repairs may involve cleaning or replacing the intake manifold tuning valve, checking and repairing wiring or connectors, or replacing the IMTV position sensor if faulty.
6. How do I diagnose the P2076 code on a Dodge?
Diagnosing involves using an OBDII scanner to confirm the code, visually inspecting the wiring and connectors, testing the IMTV position sensor, and checking for carbon buildup in the valve.
7. Is the P2076 code specific to Dodge vehicles?
No, the P2076 code can appear on any OBDII-compliant vehicle, but the specific diagnostic and repair process may vary depending on the make and model.
8. How much does it cost to repair the P2076 code on a Dodge?
Repair costs vary depending on the specific issue, but replacing the intake manifold tuning valve or sensor typically ranges from $150 to $400, including parts and labor.
9. Can a dirty intake manifold cause the P2076 code on a Dodge?
Yes, carbon buildup or debris in the intake manifold can restrict the movement of the tuning valve, triggering the P2076 code.
10. Will clearing the P2076 code fix the problem on my Dodge?
Clearing the code with a scanner will temporarily turn off the Check Engine Light, but the underlying issue must be addressed to prevent the code from returning.
Discuss the causes and fixes for P2076 Dodge OBDII Code
Code P2076 Dodge comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
