P2071 2012 Ford Fusion Code - Intake Manifold Tuning Valve Stuck Closed Bank 1
Quick Answer
The Intake Manifold Tuning Valve (IMTV) is a motorized actuated unit mounted directly to the intake manifold. Common causes include Faulty Intake Manifold Tuning Valve (IMTV), Intake Manifold Tuning Valve (IMTV) harness is open or shorted, Intake Manifold Tuning Valve (IMTV) circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2071 2012 Ford Fusion indicates Intake Manifold Tuning Valve Stuck Closed Bank 1.
- Common causes
- Common causes include Faulty Intake Manifold Tuning Valve (IMTV), Intake Manifold Tuning Valve (IMTV) harness is open or shorted, Intake Manifold Tuning Valve (IMTV) circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2071 2012 Ford Fusion Description
The motorized IMTV unit will not be energized below approximately 2600 rpm or higher on some vehicles. The shutter will be in the closed position not allowing airflow blend to occur in the intake manifold. Above approximately 2600 rpm or higher, the motorized unit will be energized. The motorized unit will be commanded on by the PCM initially at a 100 percent duty cycle to move the shutter to the open position and then falling to approximately 50 percent to continue to hold the shutter open.
The Intake Manifold Tuning Valve (IMTV) system is monitored for failure during continuous, Key ON Engine OFF (KOEO), or Key ON Engine Running (KOER) self-tests. The test fails when the signal is more or less than an expected calibrated range.
What are the Possible Causes of the DTC P2071 2012 Ford Fusion?
- Faulty Intake Manifold Tuning Valve (IMTV)
- Intake Manifold Tuning Valve (IMTV) harness is open or shorted
- Intake Manifold Tuning Valve (IMTV) circuit poor electrical connection
- Faulty Intake Manifold Runner Control (IMRC)
- Faulty Powertrain Control Module (PCM)
How to Fix the DTC P2071 2012 Ford Fusion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2071 2012 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2071 2012 Ford Fusion code?
Need more information on how to fix the P2071 2012 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2071 2012 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2071 2012 Ford Fusion Code
1. What are the common symptoms of OBDII code P2071 in a 2012 Ford Fusion related to the Intake Manifold Tuning Valve Stuck Closed Bank 1?
The common symptoms include poor engine performance, reduced fuel efficiency, rough idling, and potential stalling.
2. What causes the Intake Manifold Tuning Valve to get stuck closed triggering code P2071 in a 2012 Ford Fusion?
The main causes can be carbon buildup, a faulty tuning valve actuator, wiring issues, or a malfunctioning intake manifold runner control (IMRC) system.
3. How can I diagnose the Intake Manifold Tuning Valve Stuck Closed Bank 1 issue in my 2012 Ford Fusion with OBDII code P2071?
You can perform a visual inspection of the tuning valve, check the wiring and connections, conduct a vacuum test, and use a scan tool to monitor IMRC operation.
4. Is it safe to continue driving my 2012 Ford Fusion with the Intake Manifold Tuning Valve Stuck Closed Bank 1 issue and OBDII code P2071?
It is not recommended to drive the vehicle with this issue as it can lead to further damage to the engine components and worsen performance.
5. How can I repair the Intake Manifold Tuning Valve Stuck Closed Bank 1 problem in my 2012 Ford Fusion?
The repair may involve cleaning the intake manifold, replacing the tuning valve actuator, repairing damaged wiring, or replacing the IMRC system components as needed.
6. Can I reset the OBDII code P2071 in my 2012 Ford Fusion after fixing the Intake Manifold Tuning Valve issue?
Yes, you can reset the code using an OBDII scanner or by disconnecting the car battery for a few minutes to clear the error code.
7. Are there any preventive maintenance tips to avoid OBDII code P2071 related to the Intake Manifold Tuning Valve in a 2012 Ford Fusion?
Regularly servicing the intake system, using high-quality fuel, and driving the vehicle at varying speeds can help prevent carbon buildup and potential valve sticking issues.
8. How much does it typically cost to repair the Intake Manifold Tuning Valve issue causing OBDII code P2071 in a 2012 Ford Fusion?
The cost can vary depending on the exact cause of the problem, but repairs related to the tuning valve actuator or IMRC system can range from $200 to $600.
Discuss the causes and fixes for P2071 2012 Ford Fusion OBDII Code
Code P2071 2012 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
